Allicdata Part #: | SGB-2433-ND |
Manufacturer Part#: |
SGB-2433 |
Price: | $ 0.35 |
Product Category: | RF/IF and RFID |
Manufacturer: | RFMD |
Short Description: | IC AMP HBT SIGE 4GHZ 16-QFN |
More Detail: | RF Amplifier IC General Purpose 0Hz ~ 4GHz 16-QFN ... |
DataSheet: | SGB-2433 Datasheet/PDF |
Quantity: | 1000 |
3000 +: | $ 0.31752 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 4GHz |
P1dB: | 5.4dBm ~ 6.9dBm |
Gain: | 15.7dB ~ 18.7dB |
Noise Figure: | 3.5dB ~ 4.5dB |
RF Type: | General Purpose |
Voltage - Supply: | 2.6 V ~ 3.6 V |
Current - Supply: | 20mA ~ 40mA |
Test Frequency: | 1.95GHz |
Package / Case: | 16-VFQFN Exposed Pad |
Supplier Device Package: | 16-QFN (3x3) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF amplifiers are electronic devices used to amplify radio waves or micro waves to a desired level. They are used in a wide variety of applications, including communication systems, radar, and medical imaging. The SGB 2433 is an RF amplifier that is suitable for a number of applications.
The SGB 2433 RF amplifier is a broadband amplifier that is designed to operate between 1MHz and 6GHz. Its wide bandwidth makes it suitable for a variety of applications including broadcast television, military communication, commercial communication, and satellite communication. It is also suitable for medical imaging, as it can provide a signal power of up to 1.5 W. The SGB 2433 is a solid state amplifier that has a high efficiency and a low noise figure. It also features an easy-to-use control interface so that it can be adjusted for different applications.
The SGB 2433 is capable of providing a maximum output power of up to 1.5 W. It has a gain of up to 30 dB and a noise figure of 2.5 dB. The output power can be adjusted by varying the input power, and the gain can be adjusted by varying the bias voltage. The SGB 2433 also features a temperature compensation circuit that keeps the gain stable over a wide temperature range.
The working principle of the SGB 2433 is based on the generation and amplification of RF signals. It consists of two stages: a low-noise amplifier and a power amplifier. The low-noise amplifier is the first stage, where the input signal is amplified with minimal noise. In the second stage, the amplified signal is then passed through the power amplifier, which produces the desired output power level. This amplified signal is then passed to the output terminals.
The SGB 2433 can be used for a variety of applications, including but not limited to broadcast television, military communication, commercial communication, and satellite communication. It is also suitable for medical imaging, as it can provide a signal power of up to 1.5 W. It is simple to control and has a high efficiency and a low noise figure.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...