SI5338C-B07398-GMR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

The SI5338C-B07398-GMR is a clock/timing application-specific device available from Silicon Laboratories. It integrates a quartz-controlled crystal oscillator and a high-speed oscillator into a single chip. The crystal oscillator, coupled to two balanced output clocks, provides the basis for timing signals in wireless applications. The high-speed oscillator, with up to 16 clock outputs, is used primarily for software timing. This article will describe the application field for the SI5338C-B07398-GMR and the working principle that it follows.

Application Field:

The SI5338C-B07398-GMR supports several applications that require real-time accuracy and reliability. These applications can be found in wireless base station and test equipment, radio network controllers, and cellular radio modules. This device is used to provide the low-jitter clock source that is necessary for timing signals associated with these applications. Additionally, it is capable of providing extremely precise temporal designs when coupled with its accompanying embedded software.

In addition to these applications, the SI5338C-B07398-GMR is useful for software timing. This device provides an extremely precise timing and synchronization system when used in conjunction with its accompanying software. The embedded software includes support for a host of timing tasks, from frame control to pulse shaping to coarse-and-fine delay functions.

The SI5338C-B07398-GMR is also suited to provide a precise timing system for test and measurement applications. The device is capable of producing extremely accurate and repeatable timings for the generation and synchronization of signals used in test and measurement applications. It also offers adjustable output functions suitable for a variety of timing scenarios.

Working Principle:

The SI5338C-B07398-GMR operates by connecting a quartz-controlled crystal oscillator to two balanced output clocks. These outputs provide precise timing signals for the associated application. The crystal oscillator produces a signal at the precise frequency that is required for the application. This signal is then divided either by the ratio of two integers or by the selection of an output signal of predetermined frequency.

The high-speed oscillator is used to produce high-speed clock signals in software-based timing applications. This oscillator works by using an embedded software to generate multiple clock squares of different periods. The number of clock squares generated is dependent upon the clock speed that has been selected for the application. The high-speed oscillator is synchronized with the quartz-controlled crystal oscillator in order to produce precise timing for the application.

Additionally, the SI5338C-B07398-GMR includes an adjustable output function that enables precise timing. This function allows the device to be tuned to the exact frequency that is required for a specific application. By adjusting the output frequency, the user can accurately control the timing of their application.

The SI5338C-B07398-GMR also has programmable counters and timers that can be used to control timing and sequencing functions in specific applications. These counters and timers are adjustable and are used to synchronize signals that are associated with the application.

Finally, the SI5338C-B07398-GMR includes several built-in diagnostic tools to help troubleshoot potential problems. These tools monitor parameters such as the frequency of the quartz-controlled crystal oscillator and the output of the high-speed oscillator. The diagnostic tools can be used to track the accuracy and reliability of the timing signals in a given application.

Conclusion:

The SI5338C-B07398-GMR is an application-specific clock/timing device designed for accuracy and reliability. Its quartz-controlled crystal oscillator coupled to two balanced output clocks provides the basis for timing signals in wireless applications. The high-speed oscillator is used in software timing applications. The SI5338C-B07398-GMR also includes adjustable output functions and programmable counters and timers that allow for precise timing and sequencing. Finally, the device includes built-in diagnostic tools to help troubleshoot potential problems associated with timing signals in a given application.

The specific data is subject to PDF, and the above content is for reference