SI5338M-B04405-GM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI5338M-B04405-GM is part of Silicon Labs’ ClockBuilder Pro family of clock generators that provide an unprecedented level of jitter performance, as well as low phase noise and wide clean switching bandwidths. It is a versatile, low cost, application-specific clock generator that can be used to generate a wide range of frequencies. It is a monolithic silicon oscillator and has high level performance characteristics.

This application-specific clock generator is a low power solution that consumes just 2.0 mA at 3.3V. It is suitable for a wide range of applications, including telecom, aerospace, test and measurement, military, space, and medical/life sciences. It also performs well for general-purpose timing.

The SI5338M-B04405-GM offers a wide range of features that make it an ideal solution for many of these applications. It has a wide frequency range, from 0.5 MHz to 1 GHz. It provides tight frequency tolerance and accuracy over a wide temperature range of -40°C to +85°C without any external temperature compensation. The phase noise and jitter performance is more than adequate for telecom applications. The phase jitter at 166 MHz is very low at 0.15 ps RMS.

The SI5338M-B04405-GM can be programmed over a wide range of input voltage (1.8V to 3.3V) and output frequencies. It also supports both an auto-start option and a manual-start option. The auto-start option enables the device to start automatically when power is applied. The manual-start option enables the device to start manually by an external control signal or via a software command.

The SI5338M-B04405-GM has a low power-down current of 0.5uA, which enables efficient power management. The device also supports a wide range of integrated features such as programmable power down input, soft start/stop for smooth frequency changes, 0-1/2/4/8/16 KHz output enable/disable, and programmable spur reduction.

The SI5338M-B04405-GM can generate single output clocks, as well as differential clock outputs. It supports a dual loop SMBus control interface. This provides enhanced precision and reduce alignment jitter. The device also has an analog gain control pin (INV_C2) that can be used to fine tune the multiple output clock frequency.

The working principle of the SI5338M-B04405-GM is based on oscillators. It uses an oscillator that is capable of generating stable and accurate signals for timekeeping and synchronization functions. The oscillator is programmed by using an internal or external clock source, depending on the specific application requirements. The output frequency is set using an internal reference oscillator or an external reference input frequency. The output frequency can be adjusted or changed based on the external reference frequency or the internal reference oscillator frequency.

The SI5338M-B04405-GM is a low cost, application-specific clock generator that can be used to generate a wide range of frequencies, with tight stipulated accuracy and jitter performance. It is a monolithic silicon oscillator and has high level performance capabilities that make it an ideal solution for many of these applications. It has a wide variety of features that make it an ideal choice for low power, telecom, Aerospace and medical/life sciences applications.

The specific data is subject to PDF, and the above content is for reference