SI5350A-B04682-GTR

Series:	*
Packaging:	Tape & Reel (TR)
Moisture Sensitivity Level (MSL):	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Clock Generators, PLLs, Frequency Synthesizers: SI5350A-B04682-GTR Application Field and Working Principle

At the beginning of the 21st century, the demand for circuit miniaturization has increased exponentially due to technological advancements. Miniaturized integrated circuits (ICs) are critical components of every electrical system and device. The SI5350A-B04682-GTR is an ultra-compact, fully-integrated frequency synthesizer from Silicon Laboratories (Sillabs). It is used as a clock generator, PLL, or frequency synthesizer for a diverse range of applications. This article will explain the specifics of what the SI5350A-B04682-GTR can be used for and how it functions.The SI5350A-B04682-GTR is a mixed-signal precision analog IC (ASIC) optimized for the lowest possible power consumption, giving designers the ability to build high-performance applications while using minimum power. It is used in a wide variety of applications, including communications, instrumentation, timing control, and control systems, among others.The SI5350A-B04682-GTR is a low-jitter, high-frequency clock generator that provides designers with the highest level of integration and flexibility. It can be used in a variety of ways, such as a clock source for data synchronization, for jitter attenuation, and for frequency stability. The flexibility of the SI5350A-B04682-GTR enables device users to increase system performance, improve efficiency, and reduce power consumption.

Introduction to Clock Generators, PLLs, Frequency Synthesizers

Clock Generators, PLLs, and Frequency Synthesizers are circuits that produce periodic pulses from a reference clock, usually a sinusoidal signal of fixed frequency. These signals are then used to synchronize the digital components in an electronic circuit and to perform arithmetic operations such as addition and multiplication.Clock Generators are basic circuits that convert a reference clock of fixed frequency into an output of desired frequency. A PLL (phase-locked loop) is a specialized version of the clock generator that is used to fine-tune an output frequency as close to the desired value as possible.On the other hand, a frequency synthesizer is a circuit that generates an output frequency which is related to, but not necessarily equal to, the reference frequency. This allows it to produce a series of frequencies over a wide range of values by changing characteristics of the reference clock.

Application Field of SI5350A-B04682-GTR

The SI5350A-B04682-GTR is designed for use in instrumentation, communications, and control systems, including networking, wireless, RF, and base station applications. Specifically, it can be used for data/clock source synchronization in Ethernet, time-division multiplexing (TDM), data transmission, clock and data recovery, and control applications.In these specific applications, the SI5350A-B04682-GTR is used to generate a precise frequency output that can be used to control the data transmission rate, frequency synthesis, and synchronization of operating signals. Other applications include test and measurement, industrial automation and control, basestation timing, and general-purpose timing, such as sampling clock synchronization and data synchronization.

Working Principle of SI5350A-B04682-GTR

The SI5350A-B04682-GTR is a highly precise, low-power clock generator integrated with a programmable frequency synthesizer. It uses a modified phase locked loop (PLL) technique to achieve very stable and accurate output frequencies. The circuit consists of a VCO (voltage-controlled oscillator) to generate the reference frequency, an Low-Pass-Filter (LPF) for stability and noise-reduction, and a Phase-Switching Unit (PSU) to provide control of the output frequency. The PSU regulates the output frequency by adjusting the amplitude, phase and frequency of the reference oscillator. It is this element that allows for precise control of the output frequency and is the reason for the very high accuracy of the SI5350A-B04682-GTR.

Conclusion

The SI5350A-B04682-GTR is a high-precision, ultra low-power Frequency Synthesizer ASIC. It is a versatile circuit that can be used as a clock generator, PLL or frequency synthesizer in a variety of applications. Its unique design and precision makes it an ideal choice for applications requiring precise and stable frequency control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description