SI5350C-B02871-GTR

Series:	*
Packaging:	Tape & Reel (TR)
Moisture Sensitivity Level (MSL):	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SI5350C-B02871-GTR is a frequency locked loop that are used in the field of clock or timing system. It is a type of clock generator, PLL, and frequency synthesizer.This device,can provide jitter attenuated clock frequencies with high accuracy, and the output frequencies are generated through frequency multiplication and division to form a precise output signal. The SI5350C-B02871-GTR Clock Multiplier is highly integrated, providing outputs for multiple applications and interfaces.

Classification

The SI5350C-B02871-GTR is classified as a Clock/Timing - Clock Generators, PLLs and Frequency Synthesizers. It is used to generate multiple output clock frequencies on demand and provide precise synchronization between clock signals based on a single input reference clock and the device\'s internal voltage controlled oscillator (VCO). The SI5350C-B02871-GTR clock multiplier can operate at frequencies ranging from 16.384MHz – 640MHz, with selectable divide ratios of integer division, higher division rate, frequency multiplication and integer multiplication to generate output frequencies up to 10.24GHz.

Application Scope

The SI5350C-B02871-GTR can be used in a variety of applications such as test and measurement, radar, telecommunications, precision timing, and industrial applications. The clock multiplier can be used to synchronize and match frequencies for high-speed communications. It is especially suitable for synchronizing multiple asynchronous data streams,telemetry systems,and RF signal sources.

Working Principle

The SI5350C-B02871-GTR clock multiplier is composed of a PLL and a frequency-locked loop (FLL). The PLL converts a reference clock signal, with a frequency of 16.384MHz to 640MHz, into a frequency multiple of that reference frequency. The FLL then determines and regenerates the input reference frequency, with a high degree of accuracy, by comparing the output frequency of the PLL to the reference input frequency.The internal circuitry of the clock multiplier incorporates a phase detector, charge pump and loop filter, along with a high speed voltage-controlled oscillator (VCO). The phase detector compares output signals to the reference clock signal, and the charge pump adjusts the phase differential to minimize jitter. The loop filter then smoothes the phase signal and provides the control voltage for the VCO. The VCO converts the phase signal into an output frequency.The SI5350C-B02871-GTR can be programmed and configured using direct programming pins or via I2C-compatible serial bus. Programming options include high frequency division or multiplication ratios, low frequency divide-by-integer and divide-by-fraction ratios, variable duty cycle and delay.

Conclusion

The SI5350C-B02871-GTR Clock Multiplier is a device for use in the field of clock or timing system, which can provide jitter attenuated clock frequencies with high accuracy. It is classified as a Clock/timing - Clock Generators, PLLs and Frequency Synthesizers and is used in a variety of applications such as test and measurement, telecommunications, radar, precision timing, and industrial applications. The SI5350C-B02871-GTR consists of a PLL and an FLL, which convert a single reference clock signal into multiple frequencies up to 10.24 GHz at high accuracy. Programming options can be done by direct programming pins or via I2C-compatible serial bus.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description