SI8230BB-D-IS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI8230BB-D-IS is an Isolators - Gate Driver built by SiTime Corporation for applications requiring self-powered photocouplers. It is a waveform definition device, typically used to convert an input signal into another output signal with a well-defined timing. A self-powered photocoupler is an opto-electronic device used to transfer a signal and pass it through a barrier, such as a non-conductive isolation barrier, while providing electrical isolation between components. The device uses low voltage pulses, typically 0.5 to 1.0 volt, to drive high-voltage signals, typically up to 600 volts. This capability makes the SI8230BB-D-IS suitable for use in applications requiring robust isolation.

Applications of the SI8230BB-D-IS include automotive gate drives, industrial gate drives, appliance gate drives, communications gate drives, and medical gate drives. Some common uses of these applications include motor control, AC/DC motor drivers, and high voltage switching. It can also be used in robotic systems for complex motion control and the non-isolated gate drive systems. In all these applications, the SI8230BB-D-IS provides isolation between the primary and secondary gates, while allowing for the transmission of low voltage pulses from the primary gate to the secondary gate.

The working principle of the SI8230BB-D-IS is based on the use of a self-powered photocoupler. This photocoupler consists of two isolated parts, the transmitting part and the receiving part. The transmitting part contains an LED, while the receiving part contains a light-sensitive transistor. When the LED is triggered with a voltage pulse, it produces light which is then detected by the light-sensitive transistor. This causes a pulse to be sent from the transmitting part to the receiving part, which is then converted into a signal and passed through a barrier, providing electrical isolation.

In terms of features, the SI8230BB-D-IS is equipped with a minimum isolation voltage of 1000VDC, an input voltage range of 3.3 to 5.5VDC, and an output voltage range of 0.5 to 600VDC. It also has an operating temperature range from -40C to 85C, a maximum propagation delay of 0.2μs, and a maximum propagation delay variation of 5%.

In summary, the SI8230BB-D-IS is an Isolators - Gate Driver designed for robust isolation applications. Its self-powered photocoupler allows for the transmission of low voltage pulses, with a low propagation delay and wide temperature range. Its features make it ideal for use in applications requiring robust isolation, such as motor control, AC/DC motor drivers, and high voltage switching applications.

The specific data is subject to PDF, and the above content is for reference