SIL06C-05SADJ-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are widely used in various applications such as the charging of mobile phones, the powering of computer systems, and the powering of electronics devices in general. SIL06C-05SADJ-V is a synchronous rectified buck converters. It is a high performance, cost effective DC to DC converter module which has been designed to meet the power requirements of modern distributed power supply systems.

SIL06C-05SADJ-V is ideal for applications that require a step down voltage conversion such as voltage conversion from 5V to 3.3V, and vice versa. It features two input ranges of 4.5V - 18V and 10V - 36V, and output voltage range of 0.8V - 3.3V. The maximum output current is up to 6A. The module has on board over voltage protection, temperature protection, and over current protection.

The working principle of SIL06C-05SADJ-V is based on the buck converter topology. In buck converters, the main active component is the switch which is controlled by either a pulse width modulated (PWM) signal or a pulse density modulated (PDM) signal. The switch is used to control the flow of energy from the input source to the load, and thus the output voltage is regulated according to the duty cycle of the switch. The duty cycle determines the average voltage output of the converter.

The SIL06C-05SADJ-V also features fast transient response, wide input voltage range, low ripple and noise, high efficiency, and high integration with an on board control IC and components. In addition, it has a thermal shutdown protection function which can effectively protect the converter when the temperature is too high.

In conclusion, SIL06C-05SADJ-V is a high performance, cost effective DC to DC converter module which is ideal for applications that require step down voltage conversion. It features fast transient response, wide input voltage range, low ripple and noise, high efficiency, and high integration with an on board control IC and components. The working principle of SIL06C-05SADJ-V is based on the buck converter topology which has the switch as the main active component.

The specific data is subject to PDF, and the above content is for reference