SIL08M103G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays is an important element in circuit design. This passive device can be used as a resistive network, array, voltage divider, voltage or current reference source, switch, amplifier, control device, and voltage or current sensor. A typical example of this is the SIL08M103G. This article will explain its application field and working principle.

The SIL08M103G is a Module Resistor Network with 8 pins. It has a wide range of resistance options from 0.01 ohms up to 910 ohms. There are two kinds of volumes unit and SMD Type. Its withstanding voltage is 32V, and insulation resistance is 5X1011Ω when 1mA DC current is applied. It possesses good temperature coefficient and high reliability, and being with small size facilitates assembly. Therefore, it can perfectly assist designers to build low power electronic projects.

The SIL08M103G can be widely applied in voltage or current divider and voltage or current reference source circuits. When it comes to voltage or current reference source, a well-known example is the use of a precision voltage or current reference. The SIL08M103G is ideal for high precision, low power requirements. For voltage or current dividers, SIL08M103G can break up a voltage or current into equal parts. This is useful for various scenarios, such as maintaining a signal at a constant level, measuring voltage or current with a microcontroller, and implementing various security applications.

In a SIL08M103G, resistors are connected in serial-parallel structure. Basic module consists of 5 resistors connected in series and in parallel. Each side has four terminals; pin1-2, pin3-4,pin5-6, pin7-8. The total resistance is equal to the sum of the resistances of serial and parallel resistors. The product is suitable for applications, where only a single element resistor network is needed, or different combinations of series and parallel connection for specific voltage division ratio can be used.

In conclusion. The SIL08M103G is a versatile, compact resistor network which can be used in a variety of circuits and applications. It can act as a precise reference source, or as a method for dividing a voltage or current into equal parts. It requires no special requirement, allowing it to fit into any circuit design. This makes it a very efficient and cost-effective component.

The specific data is subject to PDF, and the above content is for reference