SIL10M472J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are components most commonly used in electronic circuits. The SIL10M472J is one such resistor network, typically employed in analog applications, which works on the principle of current sharing. The SIL10M472J is composed of four independent resistors in an array, or network, which makes it ideal for a wide range of applications, including amplifiers, low frequency filters, and high-frequency amplifiers.

The SIL10M472J is a current-sharing resistor network. This means that each resistor in the network is independent and acts independently to the other resistors. When a voltage is applied across the network, the resistors divide the voltage, meaning that the current passing through each resistor is proportional to the voltage applied. The SIL10M472J has low values of resistance, ranging from 0.1Ohm to 1.5Ohms, depending on the package size.

The SIL10M472J is used primarily in analog circuit designs. One of its most common uses is in amplifiers, as the low resistance combined with the independent nature of each resistor in the network makes them ideal for distributing different input voltages. This is because when the resistance value of the resistor array is lower, the voltage applied to each resistor can be spread out evenly, meaning that each resistor receives the same voltage, minimizing distortion from the amplifier. In addition, the SIL10M472J also comes with a wide range of temperature sensors, allowing for precise temperature measurements to be taken.

The SIL10M472J is typically used in high-frequency amplifiers, where the low resistance of the network allows for the current to pass through each resistor quickly, thus allowing for a faster response time of the amplifier. It is also used in low-frequency filters, as the independent resistors allow for different responses from the filter, making it ideal for complex filtering solutions. Additionally, the SIL10M472J is often used in multiple applications such as in medical imaging or automotive industry, as its wide range of temperature sensors and low resistance makes it ideal for these applications.

In conclusion, the SIL10M472J is an ideal resistor network for a wide range of applications. Its low resistance and independent nature allow for precise control over voltages throughout the network, making it suitable for amplifiers, high-frequency amplifiers, and low-frequency filters. Additionally, its wide range of temperature sensors makes it ideal for medical imaging and automotive industry applications.

The specific data is subject to PDF, and the above content is for reference