SIP11205DLP-T1-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SIP11205DLP-T1-E3 is a high-efficiency, non-synchronous buck switching controller with integrated high- and low-side drivers, adaptive pre-conditioning, and adjustable output voltage. It features one of the lowest residue voltages in its class while delivering high efficiency and reliable, noise-free operation.

This switch mode controller is capable of operating at an input voltage range of 2.5V to 5.5V, with duty cycles up to 98.4%, and making it an ideal choice for a wide range of applications, including fixed voltage conversions, LED driver supplies and other power converters. It is designed with a low Peak Current Mode Control which provides superior transient response, load feed-forward elimination, and programmable input undervoltage lockout.

This buck controller is also designed to operate at a wide range of frequencies from 2.5KHz/4KHz to 500KHz/800KHz and has core current limiting and over-temperature protection for long-term reliable operation. It has integrated power-good signal, an externally adjustable reference voltage, and an adjustable soft-start.

The SIP11205DLP-T1-E3 has been designed with an isolated package and has several features to minimize the impact of external noise, including low-EMI internal compensation, low core-current ripple and adjustable low-side gate discharge. In addition, this product is RoHS compliant, making it a great option for applications that are required to meet safety and environmental regulations.

The SIP11205DLP-T1-E3 is suitable for a wide range of applications including telecom systems and automotive systems, LED lighting and interfaces, consumer electronic products and other electronic equipment.

The SIP11205DLP-T1-E3 is an ideal choice for switching power supplies and DC-DC converters. It operates as a non-synchronous buck controller, and its operation is based on a fixed voltage reference, an error amplifier, and a pulse-width-modulated (PWM) oscillator. The PWM signal, generated by the oscillator, is applied to the gates of a pair of external MOSFETs, which are used to regulate the output voltage.

The input voltage is compared with a reference voltage, which is generated by circuit components. The resistor chain connected to the reference pin and a capacitance allow adjustable voltage regulation range. The oscillator frequency is set by the external resistor-capacitor network. The maximum average current is limited to a pre-programmed value.

In terms of protection, SIP11205DLP-T1-E3 has many features such as over-voltage, under-voltage, over-temperature protection, and short-circuit protection. The over-temperature protection feature set the maximum power dissipation value for the system. It is designed to shut down the output when the temperature rises above a certain threshold. The switch mode controller can be used to power a variety of electronic circuits, and can be engineered for high efficiency or no-load operation.

The SIP11205DLP-T1-E3 is one of the leading switch mode controllers for efficient power conversion applications. Its small size and low voltage operation brings advantages for a variety of applications, such as LED lighting and general purpose DC-DC converters. Its wide range of features and protection makes this an attractive choice for power-supply designers.

The specific data is subject to PDF, and the above content is for reference