Allicdata Part #: | SIP4613BDVP-T1-E3-ND |
Manufacturer Part#: |
SIP4613BDVP-T1-E3 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Vishay Siliconix |
Short Description: | IC LOAD SW HISIDE 1A SC75-6 |
More Detail: | N/A |
DataSheet: | SIP4613BDVP-T1-E3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | SIP4613 |
Supplier Device Package: | PowerPAK® TSC75-6 |
Package / Case: | PowerPAK® TSC-75-6 |
Operating Temperature: | -40°C ~ 85°C (TA) |
Fault Protection: | Current Limiting (Adjustable), Over Temperature, UVLO |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 150 mOhm |
Current - Output (Max): | 1A |
Series: | -- |
Voltage - Load: | 2.4 V ~ 5.5 V |
Interface: | On/Off |
Output Type: | P-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 1 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power management integrated circuits (PMIC) are a system of electronic circuits used to manage power and storage in electronic devices. They are responsible for optimizing power consumption and proper power distribution in a wide variety of devices. PMICs ensure that the appropriate amount of energy is supplied to the components that need it, as well as providing protection against overvoltage and other power anomalies. A crucial component of any PMIC is the power distribution switch, which regulates and distributes power to the other components of the system. The SIP4613BDVP-T1-E3 is an advanced power distribution switch, load driver, and MOSFET driver, designed for a variety of applications in consumer, industrial and automotive electronic systems.
The SIP4613BDVP-T1-E3 can provide superior performance in a wide range of applications, from automotive, consumer and industrial electronics. The highly integrated power switch consists of two sophisticated gates for control and two low resistance (RDSON) MOSFETS for signal switch-ing. It is capable of providing a range of driving and load switching signals, for switching, PWM dimming, and driving. The SIP4613BDVP-T1-E3 also provides a power-on reset (POR) signal across its enable pin, allowing the switch to remain in stand-by mode until all of the voltage supplies reach their desired levels.
As with any power switch, the SIP4613BDVP-T1-E3 can cause power dissipation, due to its active power supply, output stages, and its higher switching frequency. To reduce power dissipation, the device is equipped with a bi-directional zero current detection (ZCD) circuit, which is capable of quickly redirecting current in the event of an unexpected power shortage. This makes it ideal for applications that require efficient power management, such as those found in many consumer, industrial and automotive electronic systems.
The SIP4613BDVP-T1-E3 is capable of switching signals from 9V to 120V, with a range of regulated current from 2.5A to 5.5A. It can also drive two high side MOSFETS and two low side MOSFETS, as well as provide pre-biased outputs for quick power-up/power-down operations. The integrated MOSFET driver is designed to support a wide range of gate voltages, from 3V to 24V, making it compatible with a variety of voltage requirements.
In addition to providing superior efficiency and control, the SIP4613BDVP-T1-E3 offers superior thermal performance, with a low operating temperature range of -55°C to +125°C. This makes it well-suited to applications with extreme temperature environments, such as in automobiles and harsh industrial applications. The SIP4613BDVP-T1-E3 is also equipped with a range of protection features to prevent overcurrent and short-circuit conditions, ensuring reliable operation even in the most challenging environments.
In order to make it compatible with a wide range of applications, the SIP4613BDVP-T1-E3 is designed to offer a number of configurable options. It can be used in 3-pin, 4-pin, or single-pin packages, and each of these packages can be configured for various output voltages and currents. Additionally, its two input/output terminals can be configured as either low-side or high-side switches, to suit specific applications. This ensures that the SIP4613BDVP-T1-E3 is capable of addressing a range of power distribution requirements.
The SIP4613BDVP-T1-E3 is an advanced power distribution switch, load driver, and MOSFET driver, designed to address a broad range of applications in consumer, industrial, and automotive electronics. Its highly integrated design, along with its configurable features, allows it to deliver superior performance in challenging environments. Its zero current detection circuit and multiple protection features ensure reliable operation, and its ability to provide pre-biased outputs allows it to be quickly powered up/down while remaining in a low-power mode. All of these features make the SIP4613BDVP-T1-E3 ideal for efficient power management in consumer, industrial, and automotive systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SIP41430-001LF | Amphenol FCI | 0.0 $ | 1000 | CONN SOCKET SIP 2POS TIN |
SIP42104DX-T1-E3 | Vishay Silic... | -- | 1000 | IC H-BRIDGE DRIVER SOT666... |
SIP4282DNP3-T1GE4 | Vishay Silic... | 0.15 $ | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP4282ADNP3-T1GE4 | Vishay Silic... | -- | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP4282ADVP3-T1GE3 | Vishay Silic... | -- | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP41101DQ-T1-E3 | Vishay Silic... | 0.56 $ | 1000 | IC DRIVER MOSF N-CH DCDC ... |
SIP41111DY-T1-E3 | Vishay Silic... | 0.61 $ | 1000 | IC DRIVER HALF-BRIDGE 8-S... |
SIP4282DVP3-T1GE3 | Vishay Silic... | 0.15 $ | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP4282DVP-3-T1-E3 | Vishay Silic... | -- | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP43101DQ-T1-E3 | Vishay Silic... | -- | 1000 | IC DUAL POWER SWITCH 16TS... |
SIP43102DQ-T1-E3 | Vishay Silic... | 0.56 $ | 1000 | IC DUAL POWER SWITCH 16TS... |
SIP43101DLP-T1-E3 | Vishay Silic... | 0.67 $ | 1000 | IC DUAL POWER SWITCH 44ML... |
SIP43102DLP-T1-E3 | Vishay Silic... | 0.67 $ | 1000 | IC DUAL POWER SWITCH 44ML... |
SIP4280ADT-1-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC SW W/CTRL SLEW RATE TS... |
SIP4280ADT-3-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC SW W/CTRL SLEW RATE TS... |
SIP4280DT-1-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC SW W/CTRL SLEW RATE TS... |
SIP4280DT-3-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC SW W/CTRL SLEW RATE TS... |
SIP4282ADVP-3-E3 | Vishay Silic... | -- | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP4610ADT-T1-E3 | Vishay Silic... | -- | 1000 | IC LOAD SW HISIDE 1A TSOT... |
SIP4610BDT-T1-E3 | Vishay Silic... | -- | 1000 | IC LOAD SW HISIDE 1A TSOT... |
SIP4612ADVP-T1-E3 | Vishay Silic... | -- | 1000 | IC LOAD SW HISIDE 1A SC75... |
SIP4613ADVP-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC LOAD SW HISIDE 1A SC75... |
SIP4613BDVP-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC LOAD SW HISIDE 1A SC75... |
SIP4612BDVP-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC LOAD SW HISIDE 1A SC75... |
SIP4282ADNP2-T1GE4 | Vishay Silic... | 0.0 $ | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP4282ADVP2-T1GE3 | Vishay Silic... | 0.0 $ | 1000 | LOAD SW W/CONTROLLED SLEW... |
SIP41103DM-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC DRIVER MOSF N-CH DC/DC... |
SIP41104DY-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC DRIVER MOSF N-CH DC/DC... |
SIP41109DY-T1-E3 | Vishay Silic... | 0.0 $ | 1000 | IC DRVR MOSF 1/2BRDG N-CH... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC