SIP41109DY-T1-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SIP41109DY-T1-E3 PMIC - Gate Drivers, is a kind of driver with the advanced level of paralleling MOS field effect tube. It is suitable for switch mode power supply (SMPS), lighting, light-emitting devices and other applications. It is also used in N-channel power MOSFETS and IGBTs. This driver is specified to use with devices rated up to 560V and Tj up to 175℃. This driver features high efficiency (up to 99.9%), low power loss (up to 80% less), low jitter (less than 1 ns) and high load capacity. It has the following features which make it a good choice for many applications:

Application Field of SIP41109DY-T1-E3

SIP41109DY-T1-E3 can be used for various applications, such as switching mode power supplies (SMPS), lighting, automotive and industrial lighting, AC/DC and DC/DC converters, power ON/OFF control, volt regulation, UPS, VRM, etc.For example, with the application of SIP41109DY-T1-E3 in SMPS, it can be used for low power, medium power and high power supplies with lead or unleaded design, such as battery charger, electronic ballast, home appliance and other high-density power supply. With it, applications can benefit from the minimized power loss and smaller size, as well as achieve good cost-effectiveness.Moreover, SIP41109DY-T1-E3 can be applied in lighting, such as in LED lighting, cost-efficient lighting and tuneable lighting. It can be used in common anode circuits to control the brightness of LED–high power circuits. For example, it can provide fast PWM dimming and variable pulse width modulation, by controlling the slew rate of voltage application, which can bring improved LED flicker performance.

Working Principle of SIP41109DY-T1-E3

SIP41109DY-T1-E3 is designed with a Push-Pull MOSFET array with constant current control. The power supply provides the power to the MOSFET array, which is then activated by a logic signal input from the circuit. The output of the SIP41109DY-T1-E3 is used to control the gate of the MOSFET. The efficiency of the device is improved by the constant current drive, which eliminates the need for a transistor driver and reduces power consumption.The Push-Pull MOSFET array also allows for a more efficient power delivery, as the output voltage is regulated and independent of the load current. This results in better system performance, which includes higher efficiency, faster transient response, and lower system parts costs.The SIP41109DY-T1-E3 also features built-in undervoltage lockout (UVLO) and overtemperature protection (OTP). When the input voltage falls below the UVLO threshold, the device switches off, thus protecting itself and the system from any kind of damage. OTP monitors the temperature of the device, and if it exceeds the pre-set limit, it will shut down the device.SIP41109DY-T1-E3 PMIC - Gate Drivers are usually available in a 10-pin DIP package with an operating temperature range of -40°C to +85°C.

Conclusion

SIP41109DY-T1-E3 PMIC - Gate Drivers are designed for applications in switch mode power supplies (SMPS), lighting, automotive and industrial lighting, and AC/DC and DC/DC converters. It features a Push-Pull MOSFET array with constant current control, resulting in a more efficient power delivery. The device also has built-in undervoltage lockout (UVLO) and overtemperature protection (OTP), providing reliable and safe operation.

The specific data is subject to PDF, and the above content is for reference