Allicdata Part #: | SJPJ-D3-ND |
Manufacturer Part#: |
SJPJ-D3 |
Price: | $ 0.13 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Sanken |
Short Description: | DIODE SCHOTTKY 30V 1A SJP |
More Detail: | Diode Schottky 30V 1A Surface Mount SJP |
DataSheet: | SJPJ-D3 Datasheet/PDF |
Quantity: | 1000 |
9000 +: | $ 0.11510 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Schottky |
Voltage - DC Reverse (Vr) (Max): | 30V |
Current - Average Rectified (Io): | 1A |
Voltage - Forward (Vf) (Max) @ If: | 450mV @ 1A |
Speed: | Fast Recovery = 200mA (Io) |
Current - Reverse Leakage @ Vr: | 100µA @ 30V |
Capacitance @ Vr, F: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 2-SMD, J-Lead |
Supplier Device Package: | SJP |
Operating Temperature - Junction: | -40°C ~ 150°C |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SJPJ-D3 is a type of rectifier diode that is most commonly used in various types of power circuits. This type of diode has two distinct electrical characteristics: its forward bias characteristic and its reverse bias characteristic. The forward bias characteristic of the SJPJ-D3 is the ability of the diode to allow current to flow through the device when the voltage applied across it is of the appropriate polarity. The reverse bias characteristic of the diode is the ability to block the current from flowing through the device when the voltage is of an inappropriate polarity.
The SJPJ-D3 is primarily used as a form of protection against a potential surge in power supply to a circuit. This diode can be used to prevent a coil of reverse current from returning to the power source, as the diode will act as a one-way switch. This can be either done by installing the diode before the circuit or by integrating the diode with the circuit itself. The SJPJ-D3 can also be used in protection circuits for other types of power supply such as fuse protection and ground fault protection.
The operation of the SJPJ-D3 is based on the two electrical characteristics mentioned previously. When the diode is in the forward bias mode, it will allow current to flow through the device while the voltage across the diode is of the appropriate polarity. When the diode is in the reverse bias mode, it will block any current from flowing through it while the voltage across the diode is of an inappropriate polarity. As the voltage across the diode increases, so does its forward bias current, allowing current to be allowed to flow even more efficiently.
The SJPJ-D3 is most commonly seen in power supply circuits, as its reverse bias current prevents reverse current from returning to the power source. In addition, it can also be used in circuits where a high current needs to be protected from a potential surge in power supply. The diode is also used in circuits where voltage smoothing is required, as the forward bias current will allow for a more consistent voltage supply.
There are a few different methods for using the SJPJ-D3, including direct connection, two-terminal connection, and three-terminal connection. The direct connection is the most common and is used in circuits where the SJPJ-D3 does not need to be connected to any other component. The two-terminal connection is used for applications where the current needs to be regulated, as the SJPJ-D3 can act as a voltage regulator. In this configuration, one terminal is used as an input while the other is used as an output. The three-terminal connection is used for circuits where the SJPJ-D3 needs to be connected to other components, and the current needs to be monitored. In this configuration, one terminal is used as an input, one terminal is used as an output, and one terminal is used as a reference.
In summary, the SJPJ-D3 is a type of rectifier diode that is used primarily as a form of protection against a potential surge of power, as well as for smoothing out the current supply in circuits. It has two distinct electrical characteristics, including its forward bias and reverse bias currents, and there are three different methods for connecting it to a circuit. All of these factors make the SJPJ-D3 a versatile solution for power supply and protection.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SJPJ-L3VL | Sanken | 0.18 $ | 9000 | DIODE SCHOTTKY 30V 3A SJP... |
SJPJ-D3VR | Sanken | 0.15 $ | 1000 | DIODE SCHOTTKY 30V 1A SJP... |
SJPJ-L3VR | Sanken | 0.15 $ | 1000 | DIODE SCHOTTKY SMDDiode S... |
SJPJ-L3V | Sanken | 0.15 $ | 1000 | DIODE SCHOTTKY 30V 3A SJP... |
SJPJ-H3 | Sanken | 0.15 $ | 1000 | DIODE SCHOTTKY 30V 2A SJP... |
SJPJ-L3 | Sanken | 0.15 $ | 1000 | DIODE SCHOTTKY 30V 3A SJP... |
SJPJ-H3VL | Sanken | 0.19 $ | 1000 | DIODE SCHOTTKY SMDDiode S... |
SJPJ-H3VR | Sanken | 0.19 $ | 1000 | DIODE SCHOTTKY 30V 2A SMD... |
SJPJ-H3V | Sanken | 0.19 $ | 1000 | DIODE SCHOTTKY 30V 2A SJP... |
SJPJ-D3VL | Sanken | 0.12 $ | 1000 | DIODE SCHOTTKY SMDDiode S... |
SJPJ-D3V | Sanken | 0.13 $ | 1000 | DIODE SCHOTTKY 30V 1A SJP... |
SJPJ-D3 | Sanken | 0.13 $ | 1000 | DIODE SCHOTTKY 30V 1A SJP... |
Diodes - General Purpose, Power, Switchi...
DIODE SCHOTTKY 40V 500MA SC76Diode Schot...
DIODE GEN PURPOSE DO-204ALDiode
DIODE GEN PURP 400V 1A DO41Diode Standar...
DIODE SCHOTTKY 20V 1A DIE 1=400Diode Sch...
DIODE GEN PURP 400V 500MA D5ADiode Stand...