Allicdata Part #: | SK040NRPTR-ND |
Manufacturer Part#: |
SK040NRP |
Price: | $ 2.02 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Littelfuse Inc. |
Short Description: | SCR NON-ISOLATED 1000V 40A D2PAK |
More Detail: | SCR 1kV 40A Standard Recovery Surface Mount TO-263... |
DataSheet: | SK040NRP Datasheet/PDF |
Quantity: | 1000 |
500 +: | $ 1.83371 |
Current - On State (It (RMS)) (Max): | 40A |
Supplier Device Package: | TO-263 (D2Pak) |
Package / Case: | TO-263-3, D²Pak (2 Leads + Tab), TO-263AB |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 125°C |
SCR Type: | Standard Recovery |
Current - Non Rep. Surge 50, 60Hz (Itsm): | 430A, 520A |
Current - Off State (Max): | 30µA |
Current - Hold (Ih) (Max): | 60mA |
Series: | -- |
Current - On State (It (AV)) (Max): | 25A |
Voltage - On State (Vtm) (Max): | 1.8V |
Current - Gate Trigger (Igt) (Max): | 40mA |
Voltage - Gate Trigger (Vgt) (Max): | 1.5V |
Voltage - Off State: | 1kV |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Thyristors - SCRs, which are also known as silicon-controlled rectifiers and are four-layer solid-state devices, are widely used in various industrial processes. SCRs are found in many applications ranging from low to high power. They are often used for controlling the current flow in power electronics and for controlling the electric motors. The SK040NRP is a popular SCR for many such applications and this article will discuss the application field and working principles of the SK040NRP.The SK040NRP is a three phase, phase-control SCR, with a reverse power rating of 600 watts and a surge/non-repetitive on-state current rating of 140 Amps. Due to its combination of power rating and current under short-circuit protection it is suitable for a wide range of applications, including three-phase motor speed, current and voltage control,AC power control circuits, and switch-mode power supplies.In terms of its specific application field, the SK040NRP can be used as a switched outlet and can be effectively used with drive systems such as AC motors, winding systems, household appliances, industrial machines and more. In addition, as a result of its reverse power and current rating polyphase control can be achieved in substantial complex systems, such as washers, constant-flow pumps, drivers and load controllers.The SK040NRP has advantages over other thyristors, due to its high efficiency and ability to switch at a high frequency. The SK040NRP is designed to simplify the connection of AC lines, with the ability to monitor voltage and current levels, providing optimal switching and control for all applications. This means that the SK040NRP is an effective solution for applications requiring an AC control circuit. In particular, the SK040NRP is particularly suitable for applications using phase control, as it can ensure reliable control on the AC side.When it comes to the working principles of the SK040NRP, the SCR is based on the principle of the triggered thyristor, which acts as a voltage regulator to control the output of an AC circuit. In the case of the SK040NRP, when power is applied to the circuit, a current flows through it. When this current reaches a certain level (which is determined by the user), the SCR is triggered and the current flow is cut off.The SCR then stays blocked until the current drops below the same threshold, allowing the current to flow again. This process is repeated as often as necessary until the desired AC output is achieved. The SK040NRP also offers high surge protection, making it incredibly reliable for AC control.In conclusion, the SK040NRP is a three phase, phase-control SCR, with a reverse power rating of 600 watts and a surge/non-repetitive on-state current rating of 140 Amps. The SK040NRP is suitable for a wide range of applications, including three-phase motor speed, current and voltage control, AC power control circuits, and switch-mode power supplies. It is designed to simplify the connection of AC lines and can effectively switch at a high frequency. Moreover, it offers high surge protection and provides reliable control on the AC side. This makes the SK040NRP an effective solution for applications requiring an AC control circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
THYRISTOR 600V 12A TO220SCR 600V 18.8A S...
NCR100W-10L/SC-73/REEL 7" Q1/TSCR 850V 1...
SCR SENS 800V 800MA TO92-3SCR 800V 800mA...
THYRISTOR 200V 0.8A SOT54SCR 200V 800mA ...
THYRISTOR 600V 8A TO220SCR 600V 12.6A St...
THYRISTOR 600V 6A TO220SCR 600V 9.4A Sta...