SK12-TP (SMB5817)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SK12-TP (SMB5817) is a single rectifier diode intended for general purpose use in computing, telecommunications, and consumer electronics. It is a silicon junction diode, with a maximum forward current of 1 amp, a peak reverse voltage of 59 volts, and a maximum reverse leakage current of 1 μA. It can be surface-mounted, though the most common application is to be used on a circuit board.

Applications

The SK12-TP (SMB5817) is used in a wide range of applications. In computing, it is widely used for power supplies and rectifying alternate current signals. It can also be used in telecommunication applications, such as rectifying switching power supplies, antenna preamplifiers and phase shifters. In consumer electronics, SK12-TP is commonly used in the power supply section of consumer products, such as computers, televisions, refrigerators and washing machines.

Working Principle

The SK12-TP (SMB5817) works based on the principle of a PN junction diode. A PN junction diode is formed when two semiconductors with differing dopant concentrations are joined together. When a voltage is applied across the diode, it forms a voltage drop resulting from the depletion zone in the junction. Due to the difference in potential across the depletion zone, current cannot flow from the P-type to the N-type material, and therefore the diode “rectifies” the flow of current.

Advantages

The most significant advantage of the SK12-TP (SMB5817) is its high level of reverse voltage, which can operate up to 59 volts. This enables it to be used in a variety of applications, both in computing and telecommunications, where higher reverse voltages are required. In addition, the maximum operating temperature of 150°C also allows it to be used in environments where high temperatures are expected.

Disadvantages

One disadvantage of the SK12-TP (SMB5817) is that it has a relatively low peak reverse voltage rating of 59 volts, which limits its use in some applications. In addition, the maximum forward current of 1 amp is also relatively low, and does not allow for higher current applications.

Conclusion

The SK12-TP (SMB5817) is a single rectifier diode that is widely used for general purpose applications in computing, telecommunications, and consumer electronics. Its advantages include its high reverse voltage, which enables it to be used in high-voltage applications, as well as its maximum operating temperature of 150°C. Its disadvantages include its relatively low peak reverse voltage and maximum forward current ratings, which limit its use in some applications.

The specific data is subject to PDF, and the above content is for reference