SK34AE3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are semiconductor devices which are commonly used to control the flow of current in an electrical circuit. They act as a one-way valve, allowing current to flow in one direction, but not the other. Rectifier diodes are especially useful for converting an alternating current (AC) to a direct current (DC). The single diode rectifier, SK34AE3/TR13, is used in many different application fields and its working principle can be explained as follows.

The SK34AE3/TR13 is a single-phase, full-wave rectifier diode. It is constructed with a hermetically sealed, glass-passivated metal-semiconductor junction. This type of diode has low forward voltage drop, temperature-independent switching, high surge current capability, and long-term reliability. Its main purpose is to block current in the reverse direction and allow it to flow in the forward direction. In addition, the SK34AE3/TR13 has the following features:

• Forward voltage drop: < 0.8 volts
• Maximum average forward current: 0.75 Amp
• Power dissipation: 3 watts
• Reverse current at rated DC Blocking Voltage: 5 mA

The SK34AE3/TR13 is often used in a variety of applications, including power supplies, battery chargers, motor control, and DC-to-AC inverters. It is usually found in DC voltage regulators, where it is used to regulate the voltage in a circuit. The diode can also be used to limit inrush current and block reverse voltage.

When the diode is used as a rectifier, it takes alternating current and converts it to direct current. This is accomplished by allowing current to flow through the diode in only one direction. The SK34AE3/TR13 is a full-wave rectifier, which means it is capable of rectifying both the positive and negative half-cycles of alternating current. To do this, the diode is connected to the alternating current source in series with a center-tapped transformer. During a positive half-cycle of alternating current, the left lead of the diode is positive and the right lead is negative. The diode then blocks the current to the negative lead and only allows the current to pass through the positive lead, thus creating a direct current.

During the negative half-cycle, the leads on the diode switch places and the same process occurs, creating a second half-cycle of direct current. The resulting current is a steady, full-wave rectified alternating current. This current is then filtered and regulated to create a steady output voltage, which is usable in many applications.

The SK34AE3/TR13 diode is widely used in many applications due to its robust construction and low forward voltage drop. It is constructed of a hermetically sealed, glass-passivated metal-semiconductor junction, making it highly durable and reliable. In addition, it has a low forward voltage drop and temperature-independent switching, and is capable of carrying a high surge current. Because of its versatility and reliability, the SK34AE3/TR13 is an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference