SK38E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SK38E3/TR13 is a single diode rectifier that is used in a variety of applications, ranging from power rectification to power management in electronic circuits. The device is typically used to convert alternating current (AC) to direct current (DC), though it can also be used to regulate the power supply when connected in parallel. The device has been designed to contain a single rectifying diode and two auxiliary electrically isolated terminals. This makes the SK38E3/TR13 suitable for a wide range of applications.

When used for rectification, the SK38E3/TR13 takes in an alternating current wave, and outputs a rectified waveform. This rectified waveform has a reduced AC ripple, or AC hum. The device has a low forward voltage drop, with a maximum of 1.25 volts. This low forward voltage drop helps to reduce noise and power loss. The device can be used to cold start circuits, as the three terminals allow current to flow in multiple directions. The device also features a wide operational temperature range, from -65°C to +175°C, meaning it can be used in a variety of environments.

The SK38E3/TR13 can also be used in applications where regulation of a power supply is required. When connected in parallel with a power source, the device can be used to limit excess voltage to the downstream devices. The device can also be used in conjunction with a load switch and a Zener diode to protect a power supply from overvoltage or overpowering.

The SK38E3/TR13 is widely used in power management applications such as mainboard/motherboard voltage regulators, as well as in general rectification applications such as automotive and domestic electronics. The device is also used in applications such as power converters, AC/DC converters, invertors and battery chargers. The device is also widely used in power factor correction, where the rectifier is used to regulate the waveform of the alternating current input. The device is also used in DC motor speed controls, as the device can be used to maintain the power factor of the motor input.

The SK38E3/TR13 is a reliable and robust device that is suitable for a wide range of applications. It is important to consider the device’s current and voltage ratings when selecting the device for an application, as exceeding these will cause the device to fail. The device can be used in conjunction with other components to enable the device to reach a wider operating temperature range, as well as to provide further regulation and protection to the power source.

The specific data is subject to PDF, and the above content is for reference