SL03 22101

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush current limiters (ICL) are devices used to economically control the high inrush current associated with the energizing of capacitors. All capacitors require a certain amount of energy to rapidly charge. When the capacitor is energized, large voltages appear across it, creating a large current through the circuit. The magnitude of this current is typically quite high and can be dangerous to the circuit, potentially leading to circuit overloads or even device failure.To mitigate this problem, an inrush current limiter is used to control the amount of current going into the capacitor. An inrush current limiter is essentially an electrically operated switch that automatically limits the amount of current at start-up and can reduce the current to a safe level. The device is typically designed to operate with AC circuits, providing an adjustable level of current during start-up and then dropping back to I_limit when the capacity of the capacitor reaches its normal working level.

The SL03 221101 is one example of a product in the range of Inrush Current Limiters (ICL) available from Schneider Electric. This is a cost-effective device that can be used to economically control the high inrush current associated with the energizing of capacitors. It is designed to automatically control the amount of inrush current during start-up, thus providing improved reliability and safety.

The SL03 221101 has a working principle that is simple yet effective. The internal circuit consists of a thyristor and a resistor connected in series and a capacitor connected in parallel. When the unit is powered up, the current initially rises as the capacitor is charged but is limited by the series resistor, thus preventing overload. As the voltage across the capacitor approaches its rated value, the thyristor will fire and reduce the current, thus limiting the inrush current to a safe level. After a few milliseconds, the thyristor will be disabled, allowing the current to continue to increase until all the capacitors have been charged. The SL03 221101 is then ready for normal operation. This means that the inrush current peak has been reduced to a safe level, preventing potential overloads and failure.

The SL03 221101 is a reliable and robust device that has a wide range of applications. It can be used for capacitors with high voltage potentials such as power factor correction (PFC) capacitors, AC drive controllers, and motor control units. It is designed to work in medium and low voltage applications and can be used in any AC circuit. The device can be also used to protect motor control centers and lighting control centers from inrush current.

The SL03 221101 is a highly efficient device with low power dissipation and is designed for long-term operation. It is also easy to install and can be mounted in any orientation. Additionally, it is suitable for a wide range of environmental conditions, providing reliable protection in hot and cold climates. It is also built with high-quality components, ensuring a long service life.

In conclusion, the SL03 221101 is an efficient and reliable inrush current limiter and is an ideal choice for a wide range of applications. The device is designed to limit the inrush current at start-up and provides secure protection from potential overloads and failure. Additionally, it is easy to install, cost-effective, and is suitable for a variety of environmental conditions. The SL03 221101 is a reliable choice for protecting AC circuits from inrush current.

The specific data is subject to PDF, and the above content is for reference