SLM41AB-1206A-25-0

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The SLM41AB-1206A-25-0 is a type of Surface Mount Non-Latching Relay, commonly used in modern electronic devices for both industrial and commercial application. This relay type is usually found in applications such as industrial automation, household appliances, and computer peripherals. <p>The typical application of the SLM 41AB-1206A-25-0 is for controlling multiple loads when they need to be turned on and off at the same time. It can be connected to an interface device, such as a switch, sensor, or terminal block. When an electrical current is provided to the relay, it will energize and make the connection between the two terminals. The terminals are then able to be readily connected or disconnected as needed.<p>The working principle of the SLM41AB-1206A-25-0 is relatively simple. It consists of four poles, each of which has its own contact. When power is supplied, the two contacts at the top and bottom of the relay become connected. This enables the two terminals to be ready to be quickly connected or disconnected according to the user\'s needs.<p>The SLM41AB-1206A-25-0 is typically used in applications that require multiple loads to be switched on or off simultaneously. It is often used in industrial automation, such as assembly lines or packaging machines. It can also be used in household appliances, such as washing machines or air conditioners, to connect multiple loads with one switch. Additionally, it is used in computer peripherals, such as monitors and printers, to ensure that all connected devices are powered on or off at the same time.<p>The key advantages of the SLM41AB-1206A-25-0 are its small size and low cost. As its name suggests, it is a surface mount device, which means it can fit into tight spaces and does not require extra room to accommodate any bulky wiring. It is also a non-latching relay, meaning that it is only energized when an electrical current is supplied to it. This means that it does not require any additional power to remain in the desired state and does not require manual resetting to restore its previous state. All of these factors allow the SLM41AB-1206A-25-0 to be used in a wide range of applications.<p>In addition to its small size and low cost, the SLM41AB-1206A-25-0 also provides electrical isolation between the two connected terminals. This means that any current or voltage that flows between the two terminals will not cause any electrical interference in the rest of the circuit. This is an important factor when using the SLM41AB-1206A-25-0 in certain applications, such as medical hardware. <p>The SLM41AB-1206A-25-0 is an important component in any electronic device. Its ability to quickly and reliably connect and disconnect multiple loads makes it ideal for a variety of applications, from industrial automation to household appliances and computer peripherals. Its small size, low cost and adequate electrical isolation make it a cost-effective solution for controlling power in any situation.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description