SLR1610A

Series:	SLR
Packaging:	Bulk
Part Status:	Active
Mounting Type:	Chassis Mount
Circuit:	SPST-NO (1 Form A)
Output Type:	AC
Voltage - Input:	230VAC
Voltage - Load:	0V ~ 230V
Load Current:	10A
Termination Style:	Quick Connect - 0.250" (6.3mm)
Package / Case:	Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays

Solid State Relays (SSR) are becoming one of the most widely used switching devices in industrial and domestic applications. SSRs combine the benefits of solid state electronics and mechanical relays and have no moving parts, thus providing the consistent operation and long service life of solid state electronics as well as greater responsiveness than that of mechanical relays.One of the most popular and reliable SSRs is the SLR1610A. This SSR is a single-phase, single-pole SSR controlled by a built-in zero-current switch, and offers high current capacity of 16 A and an isolation voltage of up to 2500 V AC. The SLR1610A is designed for use in a wide range of switching and temperature control applications, and is rated for a maximum continuous operating temperature of up to 85° C.The SLR1610A is a zero-voltage-turn-on (ZVT) type SSR. This type of SSR is controlled by an internal transistor, which turns on when the input voltage is applied. The SSR will then remain on until the input voltage is removed, regardless of the amount of current flowing through the relay. This type of SSR is well suited for applications where there is a need for a low response time and where a hysteresis detection circuit is not required. The SLR1610A also contains a built-in Zero-Current Switch (ZCS), which helps minimize arcing and contact wear when the relay is turned on or off. This ZCS can detect the zero-crossing of the AC input voltage and will disconnect the current path before the polarity of the voltage changes. This helps reduce electrical noise, wear, and damage to the relay contacts.The SLR1610A is also designed with a built-in heater system. This heater ensures that the thermal characteristics of the relay can be reliably met, even under high temperature conditions. The heater system is activated by a control voltage that is provided from the control circuit.The SLR1610A is typically used in applications where precise control and safety are needed. These applications include temperature control systems, electrical circuit protection, and lighting applications. In temperature control systems, the SSR can be used to switch heater banks on and off based on temperature readings from sensors. In circuit protection applications, the SSR can be used to interrupt the circuit before the current reaches a level beyond the SSR’s rated capacity. In lighting applications, the SSR can be used to switch lighting fixtures on and off according to a timed schedule or user activity.The SLR1610A is a reliable, flexible, and cost-effective SSR and is well-suited to a wide variety of industrial and domestic applications. Its built-in ZCS ensures consistency and safety, its heater ensures reliable performance, and its rating of 16 A and 2500 V AC qualifies it for many switching applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description