SMBG5924C/TR13

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Voltage - Zener (Nom) (Vz):	9.1V
Tolerance:	±2%
Power - Max:	2W
Impedance (Max) (Zzt):	4 Ohms
Current - Reverse Leakage @ Vr:	5µA @ 7V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-65°C ~ 150°C
Mounting Type:	Surface Mount
Package / Case:	DO-215AA, SMB Gull Wing
Supplier Device Package:	SMBG (DO-215AA)
Base Part Number:	SMBG5924

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Zener - Single

The SMBG5924C/TR13 is a single Zener diode, used to regulate the voltage in electrical and electronic circuits. It is a device that consists of a semiconductor diode connected in reverse polarity with a low voltage drop across its junction. Zener diodes work differently than conventional semiconductor diodes because they are made with heavily doped p-n junctions, allowing them to operate in reverse biased mode. That is, the voltage is higher than the diode\'s breakdown voltage, allowing the device to conduct current in the reverse direction and thus regulating the voltage across the junction.The SMBG5924C/TR13 is a popular Zener diode with a wide range of applications. It can be used for voltage protection and for setting thresholds for a variety of circuits, such as logic gates, clocks, motor controllers, and amplifiers. It is also used in low-noise and ripple voltage regulation circuits. It can be used to ensure that a circuit does not overvoltage or reduce the output current to prevent any damage to components. A common use for Zener diodes is in voltage regulators. In these circuits, the Zener diode is connected in series with a resistor and a power supply. When the voltage on the diode surpasses the breakdown voltage (also known as the Zener voltage), the diode begins to conduct, allowing a steady current to flow through the resistor and the power supply to provide the regulated voltage. The ratio of the resistance of the resistor to the voltage of the power supply determines the voltage regulator\'s output voltage.The SMBG5924C/TR13 can also be used in other circuits, such as overvoltage protection circuits and ESD protection circuits. An overvoltage protection circuit consists of a Zener diode in series with a resistor and a shorting switch, connected in parallel with a load. In the event of an overvoltage, the Zener diode will begin to conduct, allowing the current to pass through the resistor and the switch to limit the current and protection the load. An ESD protection circuit, similarly, consists of two Zener diodes connected in series, with one end connected to ground and the other to the operating voltage. If a static voltage is applied to the circuit, the two diodes will both begin to conduct to limit the current, thus protecting the circuit. The Zener diode is a versatile device with a wide range of applications and the SMBG5924C/TR13 is one of the most popular due to its reliable performance. Its ability to regulate and protect circuits from overvoltage and ESD makes it a necessary component in many types of electronic systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description