SMCJ15CA V7G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SMCJ15CA V7G is a two terminal device designed for use as voltaic surge suppression. It is a member of the Transient Voltage Supressor (TVS) diode family and is commonly used by a variety of industries, ranging from consumer electronics to military applications. It has a wide range of applications and can be used for protection of sensitive circuitry and components from electrical overstress.

The SMCJ15CA V7G is a "smart" TVS diode and consists of three layers. The first layer is the P-N Junction which provides the clamping voltage for the device. The second layer is the tunnel diode, which is designed to limit the clamping voltage level. The third layer is the avalanche layer which is a protective layer against excessive energy pulses.

The SMCJ15CAV7G is designed to protect power rails, data lines and other circuits from transients induced by electrostatic discharge (ESD), electrical transients (EFT), and electro magnetic (EMI) interference. It is designed to perform this role in a variety of electrical environments including automotive, avionic, military, medical, and consumer electronics.

The SMCJ15CA V7G is designed to provide a fast response time to high frequency ESD and EFT pulses as well as low frequency EMI interference. The device is designed to limit the surge voltage to a safe level allowing the protected device to remain unaffected. The device is also designed to provide a high degree of reliability and has been tested to ensure its long term reliability.

The working principle of the SMCJ15CA V7G is very much like that of a standard diode. When the voltage across its terminals exceeds its breakdown or "clamping voltage", a large current flows through the device and its voltage is limited. The frequency at which this happens can vary depending on the type of TVS diode and the environment in which it is used. The breakdown voltage of the SMCJ15CA V7G is 15V, which is sufficient for most applications.

When exposed to an ESD or EMI pulse, the SMCJ15CA V7G will provide protection by limiting the voltage surge that could potentially destroy sensitive components. The SMCJ15CA V7G is designed to limit the peak voltage seen across its terminals to a value below the rated clamping voltage. This ensures that components connected to the diode are not damaged due to overvoltage.

Another advantage of the SMCJ15CA V7G is its ability to provide good protection against reverse transient voltage. In certain types of applications, it is possible for reverse transients to occur due to switching of loads or other electrical noise. The SMCJ15CA V7G is designed to protect against these reverse transients and ensure the protection of sensitive equipment.

In short, the SMCJ15CA V7G is a reliable and fast-acting member of the TVS diode family. It is capable of providing good protection against ESD, EFT, EMI, and reverse transient voltages in a variety of electrical environments. Its wide range of applications make it an ideal choice for a variety of industries.

The specific data is subject to PDF, and the above content is for reference