SMF05T2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS devices, also known as Transient Voltage Suppressors (TVSs), are often used to protect a circuit or other device from overvoltage. They are typically designed to protect against voltage surges caused by electrostatic discharge (ESD), lightning, electrical spikes, and other sources of overvoltage. In order to provide effective protection, TVSs must be designed to withstand surge currents that may be hundreds of times higher than the normal operating currents.

SMF05T2G is one of many types of TVS diode devices available. It is specifically designed to protect against overvoltage from ESD and electrical spikes and, due to its small size and low cost, is often used in consumer electronics products. The device is made of a Zener diode and an accompanying resistor, which work together to provide voltage protection for the circuit. The resistor and diode are connected in series to form a voltage divider network that divides the applied voltage into two parts: the portion that flows through the Zener diode and the portion that flows through the resistor.

When a voltage surge is applied to the circuit, the voltage across the Zener diode rises sharply. This sharp rise in voltage causes a rapid increase in current, which flows through the Zener diode and dissipates the voltage. The current through the resistor is also increased, but the voltage across the resistor remains nominal. This process helps to maintain the maximum voltage across the protection network, thus preventing damage to the protected circuit.

The SMF05T2G is designed to provide a high level of protection in a wide range of operating conditions, including high temperatures. Its Zener diode has a breakdown voltage of 5V, with a rated standoff voltage of 3.6V. It offers protection from ESD discharges of up to 30kV, and from electrical spikes of up to 8kV. The SMF05T2G is also designed to offer superior surge protection, with a maximum peak pulse current rating of 500A. The device also has a low leakage current rating of 1uA, ensuring that the device does not consume excess power.

With its small size and low cost, the SMF05T2G is an ideal device for use in a wide range of consumer electronics products, including cell phones, tablets, computers, and other electronic equipment. It offers an affordable solution for protecting circuits against potential overvoltage damage, while still maintaining a high level of protection.

The specific data is subject to PDF, and the above content is for reference