SMPA-208PQ-ACTEL-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SMPA-208PQ-ACTEL-1 is a programming adapter socket designed for use with Actel field programmable gate arrays (FPGAs). It provides an interface for FPGA devices to be programmed without the need for a physical programmer. As the name implies, the SMPA-208PQ-ACTEL-1 is designed specifically to work with Actel devices. The adapter socket is also suitable for other kinds of FPGAs, including Xilinx devices.

The SMPA-208PQ-ACTEL-1 adapter socket is designed to support a wide variety of data interfaces, including parallel, serial, JTAG, and BYTEBLAST. It has an 8-bit data port to accommodate a variety of data widths. The adapter socket also supports various voltage levels, including 1.8V, 2.5V, 3V, and 5V. This allows the adapter to be used in a variety of applications and environments.

In addition to providing the physical connection between the FPGA device and the programming system, the SMPA-208PQ-ACTEL-1 also provides the electrical interface. It has an 8-bit multiplexed data interface, and a 4-bit address bus. This allows the programming system to access the device\'s internal registers, and program them accordingly. The socket also provides power and ground connections for the FPGA\'s VCC and GND pins.

The SMPA-208PQ-ACTEL-1 programming adapter has many applications, especially in the field of FPGA design. It can be used to program, debug, and test FPGAs in a variety of applications. It can also be used to program FPGA devices in parallel with other devices, including microcontrollers, CPUs, and memory. This allows for faster development and testing. Furthermore, the adapter socket can also be used to program large FPGAs, such as those used in high-end embedded systems.

The working principle behind the SMPA-208PQ-ACTEL-1 is simple yet effective. The adapter socket acts as an intermediary between the FPGA device and the programming system. The programming system sends commands to the adapter socket, which then passes these commands to the FPGA device via the data interface. The FPGA then executes the commands and stores the results in its internal registers, which can then be accessed and read by the programming system.

The SMPA-208PQ-ACTEL-1 is a high-quality programming adapter socket that provides a reliable and efficient way to program and debug FPGA devices. It is suitable for a wide variety of applications and can be used with a variety of FPGA devices. In addition to its ease of use and wide compatibility, the adapter socket also provides power and ground connections, making it an ideal choice for FPGA design and development.

The specific data is subject to PDF, and the above content is for reference