SN54HC191TDE2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic counter, divider, or digital divider is an electronic circuit or device used to divide the input signal with some factor. The SN54HC191TDE2 is an advanced logic counter, divider, or digital divider and it is available in a wide range of operating frequencies and input voltages. The SN54HC191TDE2 is a member of the SN family of counter and divider products from Texas Instruments and is designed using advanced surface-mount technology.

The SN54HC191TDE2 counter and divider chip has two independent and tandem-linked counters. Each counter has four inputs and one output. The four inputs include CLK, CLKP, CLKN, and a Reset input. The CLK and CLKP inputs represent a positive-edge triggered clock signal and the CLKN input is a negative edge triggered clock signal. The reset input allows the user to reset the counter, allowing it to start again at the first state. The output of the counter is held in an output flip-flop and is driven either high or low depending on the count.

The SN54HC191TDE2 can be used in a wide variety of applications, ranging from microprocessor-based logic systems to industrial automation and instrumentation systems. It is often used in alarm or communications systems to provide a variety of counts or channels. It can also be used in measurement systems or motor controls to establish pulses of accurate lengths. In some applications, the SN54HC191TDE2 can be used to monitor the pulse rate of a machine in order to measure the speed of the machine.

The SN54HC191TDE2 is designed to work with a wide voltage range, from 2.4 to 5.5 volts. This allows it to be used in low voltage as well as high voltage applications. The SN54HC191TDE2 is designed for use in high temperature operating environments, allowing it to operate in temperature from -55 to 125 degrees Celsius.

The SN54HC191TDE2 uses a pulse-width modulation (PWM) technology to store and count the input signal. The PWM technology works by counting the time difference between two signals and it provides reliable results even if the two signals are out of sync. The PWM technology also allows the SN54HC191TDE2 to be used in applications where the input signal is high speed and unpredictable, such as in motor control systems.

The SN54HC191TDE2 is designed to provide a high-speed and reliable counting solution. Its high speed allows it to be used in applications that require rapid and accurate result generation. Furthermore, the SN54HC191TDE2’s reliability allows it to be used in applications that require a continuously accurate counting solution.

The SN54HC191TDE2 is a robust and reliable logic counter, divider, or digital divider with a wide range of frequency and voltage applications. It is designed to be used in a wide variety of applications and can be used to provide reliable and accurate results in a variety of applications. Furthermore, the PWM technology used by SN54HC191TDE2 makes it a suitable choice for applications where the input signal is high speed and unpredictable. With its wide voltage and temperature range, the SN54HC191TDE2 offers a robust and reliable counter and divider solution.

The specific data is subject to PDF, and the above content is for reference