SN65HVD76D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN65HVD76D is a Half-Duplex Differential Bus Transceiver. It is used to transfer data between two digital systems using bus protocol. This type of chip is essential in digital systems where a simplex connection or RS-232 is insufficient, and the need for high-speed data transmission is desired.

The SN65HVD76D can actually be classified in several categories. Firstly, it is a differential driver/receiver, meaning it is used to drive a differential signal across two wires, and can receive differential signals too. Secondly, it belongs to the interface family of devices, meaning it is used to provide an interface between two digital systems. Lastly, the SN65HVD76D is a transceiver, meaning it can both transmit and receive data.

The main application field for the SN65HVD76D is in high- speed data transfer. It is mainly used in applications that require a physical bus interface between two digital systems. This can be anything from a simple handshake interface for two embedded systems to large wide-area networks used to exchange data between businesses. The SN65HVD76D can be used in many different industries, such as automotive, consumer electronics, medical systems and industrial control.

In order to use the SN65HVD76D the circuit must be set up properly. The chip has four pins which are used to provide power to the device, as well as two differential inputs and outputs. The power pins, VCC and VEE, provide power to the device, while the input and output pins, A/B and B/A, are used to receive and transmit differential signals respectively. The A/B pin can both receive and drive the signal while the B/A pin acts as an output driver only.

The SN65HVD76D works by monitoring different voltages on its input pins, A/B and B/A. It is designed with built-in feedback circuitry which monitors the bus status and in turn drives the output pins. This allows for full-duplex communication between two digital systems over the same bus.

The SN65HVD76D is designed with a hysterisis of 100 mV. This means that the logic levels of the outputs are slightly different from the logic levels of the inputs, to ensure that the output does not constantly change state when there is slight fluctuations in the inputs.

The SN65HVD76D can also be used to isolate two digital systems by connecting them with a fiber optic cable, allowing them to communicate without the need for electrical connection. This is useful in applications where electrical isolation is required in order to meet safety or noise immunity requirements, or when a large distance needs to be bridged.

In conclusion, the SN65HVD76D is a Half-Duplex Differential Bus Transceiver, and is primarily used in high-speed data transfer applications, mainly where a physical bus interface is required between two digital systems. The chip has built-in feedback circuitry for full-duplex communication, and provides up to 100 mV of hysterisis to ensure that it does not constantly change states due to input fluctuations. Finally, the chip can also be used in applications requiring electrical isolation, such as when connecting two systems with a fiber optic cable.

The specific data is subject to PDF, and the above content is for reference