SN65LBC174DWG4

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Driver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	4/0
Duplex:	--
Receiver Hysteresis:	40mV
Data Rate:	30Mbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.295", 7.50mm Width)
Supplier Device Package:	20-SOIC
Base Part Number:	SN65LBC174

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>The SN65LBC174DWG4 is a differential line transceiver designed for digital data transmission over balanced lines. With features such as a wide 3.2V to 6V power supply range, low power shut down mode that consumes 10µA maximum, and low electromagnetic interference (EMI), it is a perfect fit for applications such as Ethernet, HVAC/HVAC-Type Interface, industrial automation networks, automotive infotainment networks, and home and building automation.</p> <p>The SN65LBC174DWG4 is a half-duplex transceiver, meaning it can send and receive data in one direction at a time. The transceiver has two separate channels - one for transmission and one for reception. This ensures that the data being sent between two devices is transmitted without interference or interference from the other. The transceiver works by converting the digital signal from one device into the voltage form needed for transmission over the line. The signal is then received by the other device at the other end of the line, where it is converted back into digital form.</p> <p>The SN65LBC174DWG4 is capable of data transmission up to 100Mbps, making it suitable for fast data transmission. It is compatible with most media access controllers (MAC) and medium dependent interfaces (MDI) and is certified to IEEE 802.3u and IEEE 802.3ab standards. Furthermore, the transceiver has integrated adaptive EQ, making it suitable for applications where performance is critical in environments with challenging cable conditions.</p> <p>The SN65LBC174DWG4 has a built-in receiver input fault protection circuit which provides up to 150mΩ of additional fault protection for the internal receiver inputs. This ensures that the maximum power absorbed by the transceiver is limited, making it suitable for applications where power delivery is critical. The transceiver also features differential output capability, allowing it to be used in noisy environments.</p> <p>The SN65LBC174DWG4 is capable of operating over a wide range of temperatures, from -40°C to 85°C, and is designed to tolerate environments with high electrical noise. It is designed to protect against electrostatic discharge (ESD) and has a built-in EMI filter to reduce electromagnetic interference (EMI).</p> <p>The SN65LBC174DWG4 is a versatile line transceiver that can be used in a variety of applications. It is compatible with most Ethernet, HVAC/HVAC-Type Interface, industrial automation networks, automotive infotainment networks, and home and building automation networks. Furthermore, the device is capable of data transfer rates of up to 100Mbps, offers protection against electrostatic discharge, and has an integrated adaptive EQ for use in difficult environments.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description