SN65LBC175AMDREP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN65LBC175AMDREP devices are interfacing transceivers that are compliant with the CAN 2.0 B standard. These devices enable serial communication between CAN controllers at data rates up to 1 Mbit/s. A SN65LBC175AMDREP receiver channel consists of a differential transmitter, a differential receiver and an analog receiver and transmitter. They are used to achieve robust and reliable communication in medium- and low-speed applications such as automotive systems, marine electronics, machine tools and factory automation.

The SN65LBC175AMDREP transceiver is designed to use the standard CAN protocol. This protocol is based on differential signaling, which is especially well suited for noisy environments and long bus lengths. The CAN bus is designed to be robust and requires only a minimal amount of hardware, making it a very cost-efficient communication system. It also allows for bus lengths up to 40m, making it well-suited for a variety of applications.

The SN65LBC175AMDREP device integrates a differential CAN transceiver and a CAN controller. The transmitter is capable of transmitting at data rates up to 1 Mbit/s and can support the standard CAN 2.0B protocol. The receiver enables reliable communication over long bus lengths and allows for communication over up to 40m of cable. The SN65LBC175AMDREP also includes a SOF (Start Of Frame) signal which indicates when the data transmission is starting and ending. The signal is then interleaved with the data signals, allowing the controller to synchronize with the transmission.

Thedevice features features two dual-channel receivers, four transmitters and two analog receivers. The dual-channel receivers allow for reception of data at both ends of the CAN bus. The four transmitters enable robust communication at 1 Mbit/s over long bus lengths. The analog receivers sense and read the activity on the CAN bus and allow the CAN controllers to track and monitor the bus activity. The device also includes a watchdog timer, or WDT, which monitors the activity on the bus and can reset the CAN controller and transceiver if the bus activity is not detected.

The SN65LBC175AMDREP is also equipped with power-up and power down circuitry, allowing the device to automatically reset itself following a power loss. This ensures reliable communication and allows for robust performance in a wide variety of applications. The device also features a variety of status pins and a fault diagnosis pin which can be used to monitor and diagnose any communication problems. The fault diagnosis pin can be used to detect and correct possible data errors and to terminate the fault when necessary.

In summary, the SN65LBC175AMDREP is an excellent device for a variety of interface applications. It is compliant with the CAN 2.0B standard and is designed for robust communication over long bus lengths. Its power-up and power down circuitry allow it to automatically reset itself following a power loss and its fault diagnosis pin can be used to diagnose any communication problems. Additionally, the device is cost-efficient and allows for reliable communication at data rates up to 1 Mbit/s.

The specific data is subject to PDF, and the above content is for reference