SN65LBC176QDG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN65LBC176QDG4 is an integrated circuit from Texas Instruments. It is a mezzanine card transceiver in the SCE family which features a bus interface. This device has dual-channel differential line receivers for transmitting and receiving data between two sets of signal lines. Additionally, it also offers D-type bus interface which provides a single-ended output with flexibly configurable logic levels.

Based on its features and purpose, the SN65LBC176QDG4 transceiver can be classified as an interface device among the ubiquitous type of transceivers, drivers, receivers, and transceivers used in modern electronics. The SN65LBC176QDG4 is suitable for use in applications where low-voltage, low-power operation, and high-speed data transmission are required.

The SN65LBC176QDG4 has a typical operating voltage of 3.3 volts and, as a bipolar device, can source and sink up to 16mA. The propagation delay across the device is 450ns. The maximum operating temperature range is from -20°C to +85°C.

A typical line receiver consists of a pair of transistor-transistor logic (TTL) inputs, an enable input, and a pair of complementary outputs. The SN65LBC176QDG4 transmitter is a non-inverting line driver which allows transmission and reception of data, with logic 1 and logic 0 representing high and low signals respectively.

The EN pin of the SN65LBC176QDG4 is used to enable or disable the receiver. When set to a low or logical ‘0’, the receiver is disabled. When it is set to a high or logical ‘1’, the receiver is enabled and active. This enables the device to be switched between disabled, normal, and standby modes in order to reduce power consumption.

The main advantage of this device is its high speed. Moreover, the SN65LBC176QDG4 has a Propagation Delay Time (PDT) of 450ns and its operating temperature range is from -20°C to +85°C, which makes it suitable for diverse range of operational conditions.

In the SN65LBC176QDG4 transceiver, the receiver exhibits excellent performance and low power consumption, 6mA at low voltage state, and 16mA at high voltage state. It has a wide range of input/output compatibility, with inputs as low as 0.2V and outputs as low as 0.45V. These devices are also highly resistant to transient signals and noise, with a transient immunity of greater than 4kHz (data rate).

The SN65LBC176QDG4 drivers, receivers, and transceivers are used in a variety of digital applications ranging from microprocessor systems, digital signal processing, and robotics, to analog to digital conversions. These devices can also be used for data transmission in serial port gear, electronic measuring instruments, and in various types of industrial and automotive control systems.

In conclusion, the SN65LBC176QDG4 has numerous advantages, such as high speed and low power consumption, wide range of I/O compatibility and robust transients immunity. This makes it an ideal choice for applications requiring a low-power, high-speed data transmission interface.

The specific data is subject to PDF, and the above content is for reference