SN65LV1224BDBRG4

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Function:	Deserializer
Data Rate:	660Mbps
Input Type:	LVDS
Output Type:	LVTTL
Number of Inputs:	1
Number of Outputs:	10
Voltage - Supply:	3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	28-SSOP (0.209", 5.30mm Width)
Supplier Device Package:	28-SSOP
Base Part Number:	SN65LV1224B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN65LV1224BDBRG4 is a low-power, low-voltage bidirectional, full-duplex, voltage-level translation RS-485 transceiver found in many applications, from automotive to industrial, including data transmission via bus networks. RS-485 networks can support up to 32 nodes, allowing long-distance field communication. The SN65LV1224BDBRG4 is used for bi-directional communication in half-duplex (HDX) and full-duplex (FDX) modes and has been a robust, reliable and very popular interface choice for the majority of critical networks. The SN65LV1224BDBRG4 is designed to meet the electrical and mechanical requirements of the National Semiconductor EIA/TIA-485-A standard. It supports a data rate up to 10 Mbps and withstands -40 ⁰C to +85 ⁰C temperatures, making it especially suitable for applications in harsh environments. In particular, the SN65LV1224BDBRG4 is highly recommended for applications requiring a low latency, low power, reliable interface. The device provides fail-safe operation when used with non-intelligent, opto-isolated transceiver circuits. It also provides support for applications in which a couple of inverter transceiver devices may be connected to one bus line. This full-duplex, low-voltage bidirectional serial transceiver device is also used for RS232 to RS485, RS485 to RS232, and RS232 Line Driver or Line Receiver applications. This SN65LV1224BDBRG4 Serializer-Deserializer (SerDes) is a half-duplex transceiver device, designed to accept information in the form of one serial bit and then convert that to differential balanced waveform data in both directions. The device converts the serial data stream into a differential waveform and then transmits the data on the bus lines. The basic operation of the device begins with a SYNC signal that notifies the device that a new transmission is about to start. When the device receives the SYNC signal, it prepares to begin the receive and transmit processes. The default receive mode for the device is normal, meaning the device will listen for a differential pair of signals, one for the data, and one for the clock. The device then converts these two signals into a single serial bit, which will be then outputted from the device. The device also contains a fail-safe built-in feature, where if a defective node is detected on the bus, the device will output a “0” and will not allow any communication on the bus. The transmit mode of the device works in a similar way. The device will take a single bit (LO or HI) as an input and will then convert it into a differential waveform on the bus lines. This function can also be enabled with an ENA signal. In conclusion, the SN65LV1224BDBRG4 serializer-deserializer is an ideal solution for applications requiring reliable, low-voltage bidirectional data transfer over a variety of mediums, including but not limited to RS232 and RS485. The device is robust and offers a cost-effective and low-power interface solution.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description