SN7407DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN7407DG4 is a low-voltage input Schmitt triger from Texas Instruments that consists of four independent two-input gates with Schmitt action on their inputs. It operates from one power supply ranging from 4.5V to 5.5V and is suitable for high-speed, TTL-compatible switching applications. The Schmitt trigger device uses hysteresis (the delay before the output changes state due to its input voltage crossing a certain threshold) to overcome noise and ensure speedy switching times.

The SN7407DG4 I has a wide variety of applications and can be used as a buffer, driver, receiver, or transceiver. It is typically used as a logic buffer, which can receive digital signals from other components, convert them to a stronger signal and then send them through a transmission line. It can also be used as a driver, which can convert slower digital signals to faster signals, or as a receiver, which can convert faster digital signals to slower ones. Finally, it can also be used as a transceiver, which can both receive and transmit digital signals.

In terms of working principle, the SN7407DG4 acts as two logic gates, each with two inputs and one output. The inputs have hysteresis applied to them so that any noise or oscillations caused by the passing Digital Signal will not cause a false output when using this device. The input/output thresholds of these gates will differ depending upon the supply voltage but are usually a few millivolts above or below the supply voltage. When the input voltage of both gates is at below the set hysteresis level, then the output of the gate is Low. When the input voltage of both gates is above the set hysteresis level, then the output of the gate is High.

In conclusion, the SN7407DG4 is a versatile low-voltage Schmitt triger from Texas Instruments. It can be used as a buffer, driver, receiver, or transceiver and thanks to the hygiene applied to the inputs, it has a low noise rejection and ensures speedy switching times. It is an ideal choice for logic switching applications from 4.5 V to 5.5V.

The specific data is subject to PDF, and the above content is for reference