SN74ABT2245PWRG4

Series:	74ABT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	Transceiver, Non-Inverting
Number of Elements:	1
Number of Bits per Element:	8
Input Type:	--
Output Type:	3-State
Current - Output High, Low:	32mA, 64mA; 12mA, 12mA
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C (TA)
Mounting Type:	Surface Mount
Package / Case:	20-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	20-TSSOP
Base Part Number:	74ABT2245

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABT2245PWRG4 is a logic device designed to operate in a range of logic applications, such as buffering, driving, receiving, and transceiving data. It is part of a family of functional units manufactured by Texas Instruments (TI) which are used in the industry to improve speed, reduce power consumption and increase reliability of digital systems.The SN74ABT2245PWRG4 can be used in many different applications depending on the requirement, such as in memory systems, microprogrammed systems, DMA controllers, and other digital logic devices. As it provides a low-power solution for data transmission, it can also be used in audio-rate applications.In essence, the SN74ABT2245PWRG4 is a six-bit, low-power logic IC with non-inverting outputs and active-low inputs. It is composed of either CMOS logic circuits or flip-flops, depending on the type of logic environment being used. The SN74ABT2245PWRG4 is designed to provide interface logic and support higher speed data paths, while reducing the total number of ICs required. It has two input modes – open drain output, active-low and totem pole which can be selected according to the particular device application. Open drain output is usually preferred over totem pole output due to the improved noise tolerance.The SN74ABT2245PWRG4 works through a three-state process involving two active-low control inputs (A0 and A1) and two outputs (Q 0 and Q 6 ). When the A0 and A1 inputs are both taken low, the active-low inputs are enabled, allowing the logic threshold between them to close and the outputs to become active. When the A0 and A1 inputs are taken high, the outputs become inactive, allowing them to sink to ground or remain in a high-impedance state. When the A0 and A1 inputs are open (undriven), the outputs are in a high-impedance state.In a similar methodology, the SN74ABT2245PWRG4 can be used to interface different logic levels and formats. For example, 3.3V logic can be interfaced with 5V logic by using a logic level translator. This is achieved by tying A0 to a high-logic level and A1 to a low-logic level and then using an external pull-up resistance to translate between the two logic levels.The SN74ABT2245PWRG4 also includes a slew-rate limiter to reduce overshoot and undershoot in noisy environments. This is achieved through the use of an external pull-up which is configured to limit the speed at which the logic transitions between logic states. The internal logic gates are designed to provide a fast propagating signal, which can be used to simplify logic design and reduce total system cost.The SN74ABT2245PWRG4 is just one of the many family members of the Texas Instruments (TI) family of devices. With its low-power operation, slew-rate limiter, and logic-level translation capabilities, it can truly enhance the performance of digital systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description