SN74ABT245BDBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABT245BDBR is a high-performance Octal Bus Transceiver and an integrated part of the Texas Instruments\' 74ABT family of logic devices. It is a high-speed, low-power integrated circuit, developed to provide a bi-directional buffer for 8-bit data buses. The SN74ABT245BDBR supports the full-duplex (2-wire) handshake protocols and can be used to provide a full-duplex interface between two buses with asynchronous operations. The device consists of eight non-inverting high-impedance buffers with direction control buffers, and is ideal for use as an 8-bit bus transceiver in applications requiring high speed and low power dissipation.

The SN74ABT245BDBR is primarily used for transferring data signals between two independent systems that use different transfer protocols. This type of transceiver can also be used in applications where data needs to be exchanged between two different operational domains, such as the physical and the software-driven domains. The device has eight active-low direction-control inputs, 8-non-inverting high-impedance data buffers, and 8-active low-output buffers. Each buffer is capable of providing a data transfer rate of up to 400MHz, thus making it ideally suited for use in high-speed data bus architectures.

The SN74ABT245BDBR is designed to operate over a temperature range of -40°C to +105°C and is packaged in a standard 20-pin small outline integrated circuit (SOIC) package. It is typically used in applications such as USB, IEEE 1394, Ethernet, LCD screens, printers, and other data communication systems. The device is typically used in applications requiring a high-speed full-duplex bidirectional interface or data transmission, such as in embedded applications, handheld devices, and automotive systems.

The SN74ABT245BDBR is implemented as an 8-bit bidirectional transceiver and operates by enabling the signal-driven buffers to switch direction under control of active-low direction-control inputs. The signal-driven buffers are further provided with separate active-low-enable/disable inputs, thus allowing the user to independently switch off both input and output paths. The SN74ABT245BDBR has four independent internal power-off protection circuits that are activated by CEGXL and CEGXH pins to detect any voltage drops and protect the device from the destructive level of the applied signal.

The SN74ABT245BDBR utilizes open-drain outputs for bidirectional bus devices as well as for input/output lines connected to integrated circuits (ICs). Open-drain devices operate on the same principle as an N-channel MOSFET, which requires the gate and drain voltage to be the same or lower than the source voltage. The device has one source, one drain and one gate, which is connected to ground, thus the voltage on the gate is always lower than the voltage on the source. This setup allows the open-drain outputs to switch the signal either high or low, depending upon the given control signals.

The SN74ABT245BDBR is a highly integrated and feature-packed device, which can be used in various applications requiring low-power, full-duplex bidirectional interface or data transmission. It supports standard 8-bit, full-duplex handshake protocols with three active enable signals and can be used for a wide range of applications in embedded systems, automotive, consumer electronics and telecommunications.

The specific data is subject to PDF, and the above content is for reference