SN74ABTH245PWRE4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ABTH245PWRE4 is a high-performance bus transceiver with non-inverting 3-state outputs suitable for per-byte data delivery over a multipoint bus at communication speed up to 10 Mbps. It belongs to the category of logic - buffers, drivers, receivers, and transceivers.

The SN74ABTH245PWRE4 is designed for asynchronous two-way communication between data buses. Its main role is to move data between the receiver and transmitte buffers. It has three output stages that can be used to control either one or two buses connected to its outputs. A transmission enable (TE) signal is provided to enable the transceiver to transfer data into or out of the bus.

The SN74ABTH245PWRE4 supports data communication on high-speed buses at speeds up to 10 Mbps, making it ideal for applications such as bus-oriented networks, personal computers, and point of sale systems. The transceiver is fully compatible with EIA RS485 standard and complies with UL 1577 safety standards. The device is available in SOIC package and comes with integrated protection circuitries such as thermal shutdown, latch-up protection, and over-voltage protection.

The SN74ABTH245PWRE4 transceiver works according to the balanced voltage-mode logic (VML) protocol. In this protocol, each data line is driven relatively by a voltage source connected to it. The advantage of VML is that no active current is required to drive the outputs, resulting in a lower power consumption. The outputs of the transceiver are controlled by input signals, which can be either single-ended or differentially. A pair of transceivers can be connected directly together to form a full-duplex system.

The SN74ABTH245PWRE4 also features a level-detecting circuit that ensures low power consumption and high noise tolerance. The circuit monitors the two output lines for voltage differing by 35 mV or more, thus helping to detect changes in the differential voltage. When the differential voltage drops below 35 mV, the device will switch to a high-impedance state, thereby reducing power dissipation.

The SN74ABTH245PWRE4 transceiver is specifically designed to meet the specific requirements of robust data transmission in hostile environments. With its integrated protection circuitries, the device can easily withstand voltage surges and electrostatic discharge, ensuring reliable operation in any application. The device is also cost effective and consumes minimal power, making it suitable for energy-saving applications.

The specific data is subject to PDF, and the above content is for reference