SN74AC240N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AC240N is a logic-level buffer/driver, which is conforming to TTL logic and capable of being used to drive up to 24-bit or 6-byte buses. This chip has high noise immunity, high operating speeds and a high fan-out capability, making it ideal for applications involving high loads and a fast data transfer rate. It can be used to buffer, drive and receive communication signals in a wide variety of systems, such as computers, network communication, audio, video and more.

The SN74AC240N chip is typically used for interfacing between systems. For example, it might be used to interface between a high-speed processor and a slow peripheral device. This is done by connecting the processor\'s output (on the processor side) to the inputs of the chip, and then connecting the output of the chip to the slow peripheral (on the slow side). The chip then acts as a “buffer” that isolates the two systems from each other, converting the signal from the processor side to a level that the slow peripheral side can understand and vice versa.

In applications like these, the chip provides two functions: driving/buffering and receiving. In driving, the chip takes the signal (or input) from the processor side, amplifies it, and then drives it to the receiver (the peripheral device) at the slower speed. In buffering, the chip is used to isolate the two systems from each other and limits the amount of current that the receiver side will draw. This ensures that the processor will not be overloading the receiver.

The chip also includes two drivers and two receivers, allowing it to send and receive data in both directions. In addition, both drivers have a high noise immunity, meaning that they are more resistant to interference from other electrical signals which are present in the environment. The drivers can also handle loads of up to 24-bit or 6-byte buses, and have a capacitance of up to 30 pF.

The SN74AC240N chip is easy to configure and use. Since it supports both TTL and ECL logic, it can be used in a wide variety of applications. The chip also has an enable pin, which can be used to enable or disable the drivers if they are not in use. The chip uses a single power supply which can range from 4 - 26 Vdc and has a logic high voltage of 2.4V and a logic low voltage of 0.8V.

In conclusion, the SN74AC240N is a versatile chip that can be used in a variety of applications. It is capable of driving and buffering communications signals and has a high fan-out capability. Additionally, it has high noise immunity, is easy to configure and requires only a single power supply to operate. As a result, it is suitable for a wide range of systems, making it a great choice for any application where high data speeds and reliability are important.

The specific data is subject to PDF, and the above content is for reference