SN74ACT374DW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In logic circuits, the flip-flop is an important component as it changes from one state to another and represents a single bit of digital information. SN74ACT374DW, developed by Texas Instruments, is an octal edge-triggered flip-flop which has eight independent D-type flip-flop. This component has been designed to meet the requirements of the high-speed requirement in logic applications. Its main features include low power consumption, a noise-immune operation, and an operating voltage of 3.0 - 3.6V.

The SN74ACT374DW flip-flop has several inputs and outputs, which are enabled and disabled by an edge-triggering action. The Enable Input, E, is normally low. When it goes high, the SN74ACT374DW will enable all the D-type flip flops, allowing them to change the states of their respective outputs. The latch enable inputs LE are active low, which means when their voltage falls below 1/2 VCC, the flip-flop will latch in the data of their respective D inputs. The initial states of the data inputs are ignored and the position of the rising/falling edge determines whether the data is latched in or not.

The clear inputs (Cn) are active low, which means when the low voltage level is applied, the flip-flops output will be reset to the initial state. The clock inputs (CPn) control the state of the respective flip-flops. When a rising edge or falling edge is seen at the clock input, the data present at the respective D input is latched onto the Q output. The register outputs (Qn) of the flip-flop are either high or low depending on the state of the inputs.

The SN74ACT374DW flip-flop is ideally suited for use in real-time applications, and its applications include: data acquisition, communications systems, multiplexing, sampling and converting signals, as well as in clock and timing circuits.

The SN74ACT374DW has been designed to meet the high speed requirements of digital logic circuits, and its operating speed is specified as 10-15ns, depending on the load capacitance. Furthermore, the device has been designed to meet the low power requirements of all kinds of applications, and the nominal power consumption is rated at no more than 500µA.

In summary, the SN74ACT374DW is an 8-bit, octal edge-triggered flip-flop that can be used for data acquisition, communications systems, as well as in multiplexing and clock and timing circuits due to its high speeds and low power consumption. The device has several enable and reset inputs, as well as clock and data inputs which allow the user to change the state of the device. The outputs can be either high or low, depending on the state of the inputs, and are unaffected by the initial state of the inputs. All in all, the SN74ACT374DW is an excellent choice for use in real-time applications.

The specific data is subject to PDF, and the above content is for reference