SN74ACT7806-20DLR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic - FIFOs Memory are widely used in Internet applications, equipment systems, and automation control applications. With the development of technology, FIFO Memory has become increasingly important. It can be used as an intermediate storage device that can help improve the overall performance of the system. One of its widely used products is the SN74ACT7806-20DLR, an integrated FIFO Memory buffer.

SN74ACT7806-20DLR is a FIFO memory buffer which is optimized for use in the data transmission and data storage applications by integrating the multiple components into one device. It supports data exchange between a wide variety of system buses and is ideal for supporting Hot Plug, I/O and Low Power system designs. It has up to 8 bit of input as well as up to 8 bit of output, and can handle data transfer at speeds of up to 40Mbits/s.

The SN74ACT7806-20DLR is based on the standard FIFO Memory design principles, and it use buffer register to store the data when an input data flow exceeds the capacity of the output bus. The 8 bit data is stored in a First-In-First-Out (FIFO) manner; as the data is retrieved from the register in the same order as it was stored. Each of the buffer registers are associated with count and status information to correctly drive the valid and empty signals. When the output count is greater than the input count, valid will be set and retrieve start from the count position. On other side, if the output count less than the input count, empty is set and data add from the count position. Data is retrieved or written from the SN74ACT7806-20DLR on the rising edge of the respective data and address busses.

The SN74ACT7806-20DLR has various application fields. It can be used to interface between volatile memories to auxiliary memories where read out time need to be reduced. It can also be used in Network Interface, Automotive Control System and Automatic Identification System, etc. In addition, it can also be used in a wide variety of high speed disk drive controllers. The SN74ACT7806-20DLR is ideal for the applications which requires high speed, high current, and high data transfer rate.

The SN74ACT7806-20DLR is a FIFO memory and is suitable for applications where either data or address bus switching might occur. As the device is based on standard FIFO design principles, it is robust and reliable when compared to other Memory Buffers. It can increase the system performance with its high speed and data throughput capability, and provides designers an ideal solution for their data storage and transmission needs.

The specific data is subject to PDF, and the above content is for reference