SN74CBT3384CDBQRG4

Series:	74CBT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Bus Switch
Circuit:	5 x 1:1
Independent Circuits:	2
Current - Output High, Low:	--
Voltage Supply Source:	Single Supply
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	24-SSOP (0.154", 3.90mm Width)
Supplier Device Package:	24-SSOP/QSOP
Base Part Number:	74CBT3384

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74CBT3384CDBQRG4 is a logic circuit device used in signal switches, multiplexers, decoders, and data converters. It is a quadruple bidirectional translating transceiver that is designed to support both low voltage and high voltage digital signaling levels. It features four independent bidirectional channels, each with its own dual complementary output. The device is optimized for both low speed (< 1 MHz) and high speed (18 MHz) applications, and features internal phase synchronization (TPS) capability. The SN74CBT3384CDBQRG4 is a voltage translator developed by Texas Instruments. The device is based on the Seebeck substrate technology. It is an octal buffer/driver with ten non-inverting buffer/driver pins and four inverting buffer/driver pins. It claims to have improved noise immunity over its predecessors, the SN54HC244 and SN74ACT245. It is a high-speed, low-power device that meets the requirements for fast data transfer.The SN74CBT3384CDBQRG4 is an active logic device that is used to amplify, or “translate”, digital signals passing through it. It is often used as a “level shifter” to move signals from one voltage level to another. The SN74CBT3384CDBQRG4 features internal power-up reset (PUR) circuitry, which serves to reset the device to a known state during power-up. It is rated to handle up to 18mA of output current and 4.5V to 5.5V of input voltage.The SN74CBT3384CDBQRG4 is a multiplexers, decoders and logic switches device that is primarily used as a switching device in digital circuits. The device features four independent bidirectional channels, with each channel having two complimentary outputs which enable the user to both drive and receive signals. The SN74CBT3384CDBQRG4 device is also used for data conversion between interface standards, such as I²C, SPI, and RS-232.The SN74CBT3384CDBQRG4 is capable of providing logic level conversion between TTL and CMOS logic devices at the same time. It does this by providing high-speed level translation between devices operating at high-voltage, low-voltage, or open drain logic levels. This flexibility allows the SN74CBT3384CDBQRG4 to be used in a wide range of applications—including, but not limited to logic switches, multiplexers, and decoders.In order to understand how the SN74CBT3384CDBQRG4 works, it is important to look at its architecture and how the different inputs and outputs connect with one another. The device is composed of four independent bidirectional channels, with each channel featuring two dedicated active low input/output pins. These pins are used to drive and receive digital signals. The two remaining pins are then connected to the corresponding input/output pin pair in the other channels. By using these connections, the device is able to achieve simultaneous transmission and reception of digital signals between different devices.The SN74CBT3384CDBQRG4 is a popular device used in many digital circuits, due to its capability for simultaneous transmission and reception of digital signals, as well as its flexibility for providing logic level conversion between TTL and CMOS logic devices. Its wide-ranging capabilities and applications make it an excellent choice for logic switches, multiplexers, and decoders.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description