SN74AHC125PWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SN74AHC125PWR

The SN74AHC125PWR is a four-channel logic buffer from Texas Instruments. It is used as a buffer, voltage translator, or switch between two signals, enabling them to communicate with one another. The SN74AHC125PWR is part of the High Speed Physical Layer family of products. This product family is designed to support a variety of applications including networking, telecommunications, and industrial control.

The SN74AHC125PWR is a four-channel logic buffer that can be used to buffer and improve the integrity of high-speed signals. It is suitable for applications requiring a low-voltage and high-speed logic gate. The SN74AHC125PWR contains four identical channels, each with its own input and output buffers. It is designed to buffer standard 5V logic signals, though it can also be used with other logic levels if the input and output are limited by the power supply.

Application Field

The SN74AHC125PWR 4-channel logic buffer is perfect for applications requiring data transfer and signal buffering, such as:

• Networking – Allows for error-free data transmission over long distances
• Telecommunications – Isolates and buffers signals to ensure reliable operation in noisy environments
• Industrial Control – Buffers signals to ensure robust operation

The SN74AHC125PWR is also used in a variety of digital logic applications, including digital signal processing, robotics, and power supply design. Additionally, the SN74AHC125PWR can be used to drive high-capacitance loads and increase noise immunity.

Working Principle

The SN74AHC125PWR is a four-channel buffering device that contains four identical channels, each with its own input and output buffers.

The input and output buffers of the SN74AHC125PWR are independent from one another. This means that each channel can be used independently. The input buffers enable the device to be driven from standard 5V logic signals, but can also be used with other logic levels if the input and output are limited by the power supply.

The SN74AHC125PWR uses Schmitt triggers at its inputs to eliminate noise and provide correct logic input levels. The Schmitt trigger provides a hysteresis limit between the logic high and logic low levels, allowing the threshold voltage range to be wider than the source voltage level.

The output buffers use push-pull technology to drive high-speed signals with low interference. The buffers are enabled by an enable pin, allowing them to be turned on and off separately.

The SN74AHC125PWR is rated for a supply current of 4.7 mA and a propagation delay time of 4 ns at 5 V. The device is capable of operating at a range of supply voltages from 1.65 V to 5.5 V, making it suitable for use in wide range of applications.

Conclusion

The SN74AHC125PWR is a four-channel logic buffer suitable for a wide range of applications. Its independent input and output buffers enable it to be used as a buffer, voltage translator, or switch between two signals. It is rated for a supply current of 4.7 mA and a propagation delay time of 4 ns at 5 V. Its wide range of supply voltage (1.65 V to 5.5 V) makes it suitable for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference