SN74AHC157PWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AHC157PWRG4 is a general logic family, with logic - signal switches, multiplexers, and decoders. It is designed to operate at 0.5 to 4.5 V (VCCA), with minimum power consumption. SN74AHC157PWRG4 consists of 4 multiplexer/demultiplexers, which allow for the selection or decoding/demultiplexing of two binary signals. Each accepts two data inputs (A1 and A2 ), a select input (S0 ), a select output (Z ), and a ground (GND).

The SN74AHC157PWRG4 has two active-low select inputs, S0 and S1 . A logic low is used to select the corresponding A0 or A1 input. If a high is applied to both inputs, either A0 or A1 will be selected. If both S0 and S1 are low, the output is ‘forced’ low. All outputs have substrate diodes with a high-level output. SN74AHC157PWRG4 is used in applications like address decoding, data selection and storage, logic operations, and multiplexing applications. For example, in multiplex/demultiplex applications, the output of a computer or microcontroller can be demultiplexed and routed to a number of output devices, such as transceivers or LCDs.

The SN74AHC157PWRG4 multiplexer operates on CMOS technology, which enables it to switch between high and low logic levels without the use of additional components. Other features of the SN74AHC157PWRG4 include extremely low power consumption, low on-resistance, wide range of possible logic combinations, and fast switching times. It is commonly used in multiplexers, logic gates, decoders, and data switches due to its powerful and reliable performance.

The working principle of the SN74AHC157PWRG4 is based on the concept of digital circuit design. The circuit consists of four multiplexers, each of which has two data inputs and two select inputs. The data inputs, A0 and A1 , are the two binary inputs to the multiplexer. The select inputs, S0 , S1 , determine which one of the two inputs is selected. When S0 and S1 are ‘high’, A0 is selected; when S0 and S1 are ‘low,’ A1 is selected. The output, Z , is the selected signal from A0 or A1 .

The SN74AHC157PWRG4 multiplexer is a very important device in the digital circuit design. By using this device, multiple signal can be switch rapidly, with extremely low power consumption and low on-resistance. Also, the wide range of possible logic combinations makes the SN74AHC157PWRG4 suitable for applications such as multiplexers, switch matrices, decode/demultiplexers, data storage and selection, and logic operations.

The specific data is subject to PDF, and the above content is for reference