SN74AHC244PWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AHC244PWG4 is a quad buffer and line driver component, classified as operating within the Logic - Buffers, Drivers, Receivers and Transceivers categories. This component was designed to provide a component capable of replacing the majority of functions previously provided by the TTL logic family, with a focus on reducing power consumption. This component contains a four-wide buffer and line driver, providing data transfer between microprocessors, and other high-speed logic interfaces. It has an operating voltage range of 1.15 to 3.6 volts, and has an operating temperature range of -40 to 85 degrees Celsius.

The component contains an input to output isolation through an inverting buffer with a tri-state output, providing access to the outside inputs on multiple memory devices. The output can be high or low when the Tri-state output control is enabled, or will be in a high impedance state when Tri-state is disabled. This component is designed to be suitable for high-speed logic applications, and provides rise and fall times of 4 and 3.5 nanoseconds. This component also reduces second edges and ground bounce, allowing for greater data integrity, and a interference free environment.

This component contains two separate buffers, one configured as an active-high, non-inverting buffer and the other as an active-low, inverting buffer. This provides an open drain with a pull-up resistor for driving low level logic signals and also allows for voltage-level sensing. The drive capability is rated for up to 24 milliamperes, providing for a wide range of applications for this component. Its low-power CMOS construction is designed for maximum noise and power suppression, with power dissipation of 1 microampere, thus providing extended life and reliability.

The output enable mode is designed to enable simultaneous control of all outputs, with four combinations of enable and direction capability, enabling a wide range of applications. The SN74AHC244PWG4 is a versatile component and can be used in applications such as busses, digital logic designs, data and address buses and even memory systems, as well as many other applications which require buffering capabilities.

The SN74AHC244PWG4 provides two buffers, one non-inverting and one inverting. It is designed with a built-in pull-up resistor, providing an open drain that allows for low-level logic signals to be driven. Its low-power CMOS construction allows for maximum noise and power suppression, with its power dissipation of just 1 microampere. Its wide range of applications, from busses and digital logic designs, to data and address buses and memory systems, provides for many great possibilities.

The specific data is subject to PDF, and the above content is for reference