SN74AHCT138DBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AHCT138DBR is a 3-8 line data selector/multiplexer with latch IC containing three enable inputs (E1, E2 and E3). It is designed for 8-bit addressing applications requiring full three-state outputs from each of eight output latches. It is a member of a large family of data selectors/multiplexers with latch ICs offering versatile logic functions and flexible accommodation of bus lines. It is usually used in a variety of applications such as address decoding, multiplexing, and data routing.

The SN74AHCT138DBR is a high-speed, low-power CMOS multiplexer/decoder based on a static shift register technology. It is controlled by an enable input (E1), and has two control lines (E2, E3), which can be used to activate a signal to a certain output, depending on the significance of the data previously input. The two active low enable inputs, E2 and E3, can be used to either parallel-load or serial-load the data into the latch, and the E1 signal can be used to activate the multiplexer. The SN74AHCT138DBR functions as a one-to-eight-line data selector/multiplexer with latch when using the E1 low enable control signal. It features an extended static latch that allows for the multiplexing of the input data to the outputs. Once the data is selected, it can be latched and transferred by the latch enable.

The SN74AHCT138DBR is a three-state logic device and supports a wide range of applications. It can be used for edge-activated logic such as address and data multiplexers, bus transfers, and code converters. It can be used to select the appropriate output and data to send over a bus line. For example, it can be used to select which data is to be sent over a certain bus line, or how many bytes of data to be sent. With the latch enable, it can be used to momentarily store the data and prevent changes in between multiplexing cycles. This makes the SN74AHCT138DBR a great choice for applications that require multiplexing and data transfer.

The SN74AHCT138DBR can also be used as an efficient decoder for decoding signals. The enable inputs E2 and E3 are used to select which input is active and to direct the output to one of the 8 active outputs. For example, it can be used to decode a 3-bit binary code to a single output. It can also be used as a single-bit selector/multiplexer. The enable inputs can be used to select the desired output from the 8 outputs.

The SN74AHCT138DBR can also be used for other special applications such as multiplexing and encoding. It can be used to multiplex several addresses or data lines and encode the data in binary form. This can be used in various applications such as encoding an address on a bus, which can then be read by the decoder portion of the device. It can also be used to multiplex multiple data lines on a bus.

In summary, the SN74AHCT138DBR is a data selector/multiplexer with latch IC that is ideal for 8-bit addressing applications requiring full three-state outputs from each of eight output latches. It can be used for applications such as address decoding/multiplexing, bus transfers, and decoding. It can also be used for special applications such as encoding and multiplexing, and it is fast, low-power and highly reliable IC.

The specific data is subject to PDF, and the above content is for reference