SN74AHCT367D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

 
The SN74AHCT367D is a hex bus transceiver suitable for high-speed bus-oriented applications. It combines an 8-bit bus transceiver and bus buffer/driver with two control-signal buffers. The transceiver includes an 8-bit bidirectional data port and five buffers that are selectable as three-state outputs or active-low, active-high outputs. Each buffer can drive up to 250 mA and has typical VOL characteristics of 0.4 V for a 2.6 V to 5.5 V supply voltage. The 8-bit bidirectional data port is controlled, allowing data flow from all eight ports in one direction under control of the three-state output enable (OE) signal. The SN74AHCT367D is capable of fast data exchange between buses and provides direction control.
The SN74AHCT367D belongs to the category of Logic-Buffers, Drivers, Receivers, Transceivers. It is basically used to buffer and drive digital signals (like data, address, control and status signals) via a single signal line to provide good noise immunity and also to reduce signal reflection by distributing the signal into multiple lines. The SN74AHCT367D is suitable for applications that require high-speed data transmission and data exchange between multiple buses.
The SN74AHCT367D consists of eight buffers and one buffer enable (BE) input, which is active low. All eight buffers are operating in a three-state open collector mode. Depending on the BE signal, either the output of each of the eight buffers is pulled low, or it is released from the low state, allowing it to either float or be driven by an external circuit. The BE signal itself can also be used to drive a signal on the bus as it can actively pull the bus down if desired. The address and data lines are buffered with hex inverters providing high drive capability to the bus.
The working principle of the SN74AHCT367D is based on the open-collector principle. The open collector devices in the chip work like a switch. When the transistor is turned on, the output is \'low\' while when it is turned off the output is \'high\' or \'floats\'. The chip uses the snubber network to protect the output pin from excessive voltages or currents when the output is low. The snubber circuit is also used to limit the voltage rise and fall times to prevent too much noise when transitioning states.
The SN74AHCT367D is a cost-effective solution for a wide range of applications. It can be used for high-speed data exchange in a wide range of systems from industrial, medical and consumer products. In medical applications it is used for amplifying signals from medical instruments. In consumer products it can be used for driving displays or controlling audio/video equipment. In industrial products, it is used for data and control communication between various systems. It is also used in telecom applications for the generation of high-speed signals.
In summary, the SN74AHCT367D is a hex bus transceiver that combines an 8-bit bidirectional data port and five buffers for fast data exchange between buses. It is suitable for high-speed applications that require data transmission and data exchange from multiple buses. With its high-speed buffering capability and low power consumption, the SN74AHCT367D is an excellent choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference