SN74AHCT374DGVRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic circuits are at the heart of microprocessors and digital systems. One of the most fundamental and important components of these circuits is the flip-flop. A digital flip-flop is a circuit device designed to store the data present on a digital line in the form of two possible output states. Flip-flops are essential building blocks of almost all digital logic circuits, such as registers and counter and form the basis of all digital computations. The SN74AHCT374DGVRG4 is a Dual D-type Positive-Edge-Triggered Flip-Flop which is widely used for data storage and transfer in digital circuits.

Overview of SN74AHCT374DGVRG4

The SN74AHCT374DGVRG4 is a Dual D-type Positive-Edge-Triggered Flip-Flop which is widely used for data storage and transfer in digital circuits. It consists of two identical, independent, edge-triggered, D-type flip-flops which act as 1-bit storage registers. It is widely used in applications such as digital counting and storage devices, shift registers, data buffers and data storage registers. The SN74AHCT374DGVRG4 offers low-voltage operation, low quiescent current, and a wide input signal range, which makes it ideal for low-voltage applications. In addition, it features a power-saving shutdown mode which helps reduce consumption during periods of inactivity.

Application Fields of SN74AHCT374DGVRG4

The SN74AHCT374DGVRG4 is mainly used in noisy environments, when signals must pass through long wires or PCBs. The two flip-flops can be used together as a single 1-bit shift register and can be combined to build multiple-bit shift registers. It can also be used to build frequency dividers or can be used as mode selectors or selectors of like functions in electronic systems. The output buffers are designed to drive low-impedance loads, making it suitable for interfacing directly with TTL and CMOS logic levels. In addition, it can be used in address decode and buffer applications, as well as in bus arbitrators and multiplexers.

Working Principle of SN74AHCT374DGVRG4

The SN74AHCT374DGVRG4 is a Dual D-type Positive-Edge-Triggered Flip-Flop which consists of two identical, independent, edge-triggered, D-type flip-flops. When enabled, the Clock (CLK) pin receives a positive-going signal and sets the D-type flip-flop. This causes the Q output to latch the data present at the D input. When the CLK pin receives a negative-going signal, the flip-flop is reset. The Reset pins (RESET) can be used to override the CLK inputs and force the outputs to a known state (low). The OE (Output Enable) pin is used to simultaneously enable or disable both the flip-flops’ outputs. The SN74AHCT374DGVRG4 is designed to be used in noisy environments and its outputs are designed to drive low-impedance loads, making it ideal for most digital logic designs.

Conclusion

The SN74AHCT374DGVRG4 is a Dual D-type Positive-Edge-Triggered Flip-Flop which is widely used for data storage and transfer in digital circuits. It is designed to be used in noisy environments and its outputs are designed to drive low-impedance loads, making it ideal for interfacing directly with TTL and CMOS logic levels. It is an essential component in almost all modern digital logic systems and is used primarily in applications such as digital counting and storage devices, shift registers, data buffers and data storage registers. It is a versatile and reliable component which can be used to build address decode and buffer applications, as well as frequency dividers and multiplexers.

The specific data is subject to PDF, and the above content is for reference