SN74AHCT574NSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AHCT574NSRG4 is a general-purpose synchronous low-power flip-flop with a dual clock enable and an asynchronous reset. It is commonly used in applications such as frequency synthesis, motor control, logic conversion, logic gating, and measurement and control. This flip-flop is equipped with a low-power CMOS 3-state buffer for low-voltage applications, and a high-speed 5V-tolerant D-flip-flop for high-speed applications. It is also suitable for a variety of other applications such as memory and port I/O, analog-to-digital and digital-to-analog conversion, timing and logic, and robotics.

The SN74AHCT574NSRG4 is a high-performance flip-flop designed to efficiently provide power and speed while minimizing supply current and power dissipation. Its internal circuitry and logic are designed to minimize power, achieving a low-power, low-spike power density solution. The SN74AHCT574NSRG4 has a maximum power dissipation rating of 1.0 W and operates over a single supply ranging from 1.2 V to 3.3 V. It has a propagation delay of 8 ns at 3.3 V and 10 MHz, and a power-down fall time of 10 ms.

The SN74AHCT574NSRG4 consists of two dual-edge-triggered D-type flip-flops, with a latch enable input on each flip-flop for synchronous operation and an asynchronous reset. It also includes a pair of 5V-tolerant D-type flip-flops, one for each latch enable input and one for the asynchronous reset input. The latch enable input allows the flip-flop to be enabled at either the rising or falling edge of the clock signal depending on the logic level of the enable input. If the latch enable input is logic high, then the input is enabled at the rising edge of the clock, while if it is logic low, the input is enabled at the falling edge of the clock. This provides the flexibility and convenience of synchronous operation when needed. The reset of the flip-flop is asynchronous and the reset is active low.

The SN74AHCT574NSRG4 uses CMOS logic levels, allowing it to be used in systems that are sensitive to power supply spikes and noise. The CMOS logic levels make it easier to interface with other devices, such as memory and port I/O devices. The internal circuitry and logic of the SN74AHCT574NSRG4 were designed to minimize power and allow for low-voltage, low-spike power density solutions.

The SN74AHCT574NSRG4 is suitable for a wide range of applications, from motor control to logic conversion and logic gating. Its versatility and performance make it a great choice for logic conversion, motor control, frequency synthesis, logic gating, and a variety of other applications. The SN74AHCT574NSRG4 is a powerful, low-power, and low-spike device that can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference