SN74AHCT74MDREP Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Flip flops are combinational logic circuits used to store one bit of information as either a logic ‘1’ or a logic ‘0’. The logic consists of two or more inputs and two outputs. The data is stored as long as power is applied. Flip flops are widely used in both digital and analog circuits.

The SN74AHCT74MDREP is one such device in the market today. It features a very low power, wide voltage range and low-power-tiering circuit. This device – also known as a dual D-type or Positive Edge-Triggered D-Flipflop – is widely used for many applications such as for instantaneous changeover circuits, as frequency dividers, for code conversion, etc. It essentially allows two bits of data to be latched simultaneously.

The SN74AHCT74MDREP provides two control inputs and two outputs. The control inputs, labeled CLK (clock) and EN (enable), are the means to initiate data transfers. The positive edge-triggered logic provides an active HIGH latch enable (or EN) using the CLK. When EN is set to HIGH, data is constantly clocked into the device with each clock edge and is then stored. Data is then present on the outputs (Q0 and Q1) to be used downstream. If EN is set to LOW, the device is disabled and the outputs are forced to the quiescent state.

The device features 2-V to 5.5-V VCC logic compatibility, allowing the device to interface with logic families across a wide range of voltages. It also has input hysteresis, providing noise immunity and eliminating problems of metastability. The power-wise, it’s safe to say that this one is a winner considering its very low power consumption levels.

In summary, the SN74AHCT74MDREP dual D-type flip flop is an incredibly useful device. It offers low power consumption and wide-ranging compatibility with various logic families. It also has an instantaneous changeover and code conversion capability. The EN input allows for easy enable/disable of the device. It is well-suited for use in frequency divide and code conversion applications.

The specific data is subject to PDF, and the above content is for reference