SN74ALS157ADR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ALS157ADR is an integrated circuit part from the74ALxxx family of popular logic parts from Texas Instruments. It is classed as a logic - signal switches, multiplexers, decoders and serves multiple purposes depending on the connection of the pins and the desired outcome. This part serves as a means to multiplex, switch and decode digital logic signals.

The chip is based upon the popular industry-standard TTL architecture. This three-state IC device is a Quad 2-Line Multiplexer/Demultiplexer, containing four independent channels and has sixteen pins in all. Each channel has two data inputs labeled A0 and A1 and a respective output labeled Y0, Y1, Y2 and Y3. The SN74ALS157ADR also has two select inputs, one active high and the other active low. In between the two select inputs lies an output enable input, which allows for the multiplexer/demultiplexer to place its outputs into the high impedance state.

In terms of its application field, the SN74ALS157ADR gig is very versatile and can be applied to a number of situations where multiplexing and switching are needed. They are used in a vast array of digital signaling systems including electrical power systems, medical equipment, telecoms and even in basic computers and various controls. In each of these scenarios, the chip provides a way to use logic signals to electronically switch, multiplex and decode information by means of a controller.

To understand how this chip works it is necessary to explore its application of logic signals. Logic signals are digital signals, which may only have two values - 0 and 1 in this case. These values are dependent on the input and can be changed by external connections such as the select inputs when using the chip in multiplexer/demultiplexer mode. The two select lines, S0 and S1, determine which data line (A0 or A1) is connected to the output line. When both select lines are at a logic 0 value the output reflects the value of A0; when they are at a logic 1 value the output reflects the value of A1; and when they are both at a logic 1 or 0 the output is in the high impedance state.

The SN74ALS157ADR part can also be used as a switch. When the output enable line is used, the logic signals connected to the select inputs determine which input is connected to its respective output. In this accordance with these logic signals, the independent channels are separated while the remaining channels are connected to their respective outputs. It is dependant on the combination of logic signals applied the output lines that determine what is connected to the output lines - whether it is the A0 line or the A1 line.

In conclusion, the SN74ALS157ADR chip is a very important part of many digital signalling systems due to its capacity for electronic switching, multiplexing and decoding of signals. The chip is a part of the 74ALxxx family of logic parts from Texas Instruments and is based on the industry-standard TTL architecture. This makes it a useful part for use in a wide range of applications where digital signals need to be manipulated. The chip uses two select inputs and an output enable to control the switching and multiplexing of data signals and can accurately control four independent channels.

The specific data is subject to PDF, and the above content is for reference