SN74ALS257ANSR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ALS257ANSR is a wide-voltage, high-speed multiplexers that feature low output current and high noise immunity. It is useful in multiple applications and particularly useful for high-speed data multiplexing or protocol conversion. It features an asynchronous reset that is set active anytime the power is initially applied to the device and can be used as a reset for an entire system.

This particular device is capable of switching signals at speeds of up to 140MHz and can accept input voltages between 2.7V and 5.5V. It has the ability to automatically detect logic levels without manual bias control. It also has excellent propagation delay, input clamping diode protection, and low noise immunity levels. In addition, the SN74ALS257ANSR has flexible supply voltage levels and can be used with 5V and logic supplies.

The SN74ALS257ANSR belongs to the Logic - Signal Switches, Multiplexers, Decoders category, because it contains multiplexers, decoders and output enable (OE) control circuits. Multiplexers enable routing of multiple signals to a single output, while decoders enable the selection of individual outputs from a single input. OE controls toggle the output enable signal to establish communication between the input and the output circuit.

The working principle of the SN74ALS257ANSR is based on the concept of multiplexing and decoding. Multiplexing refers to routing a signal from a single input line to multiple output lines, while decoding enables a signal from a single output line to be routed to multiple outputs. As the signal approaches the input line of the SN74ALS257ANSR, it is split into multiple outgoing signals which are then routed to the available multiple output lines. Once the signal reaches the desired output line, the OE control signal is used to establish communication between the input and the output circuit.

When the OE control signal is active, the signal is output as an active signal. If the OE control signal is not active, the signal is output as an inactive state. This type of device is perfect for use in applications such as switch matrix circuits, data multiplexers, and protocol conversion. Overall, the SN74ALS257ANSR is and excellent choice for those applications requiring high-speed multiplexing and decoding.

The specific data is subject to PDF, and the above content is for reference