SN74ALS569ANG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ALS569ANG4 is a 16-bit self-contained synchronous frequency divider/counter integrated circuit commonly used to produce a wide range of output frequencies from one base frequency. The 4 output ports of the chip can either be configured as individual general-purpose counters, or as independent synchronous frequency dividers.

The main application field of SN74ALS569ANG4 are the ones related to frequency sources, such as direct digital synthesizers, waveform generation, audio synthesizers and control systems applications. Some examples of application fields are: LED dimming control, power measurement and timing of other analog or digital systems.

The SN74ALS569ANG4 uses a configuration bit, called the PD (power down) or LAG bits, that allow manipulation of synchronization. In addition, the chip has a STOP selection bit, which is used to set the maximum frequency of the output. The output of the SN74ALS569ANG4 is available in the form of pulses.

The main working principle of SN74ALS569ANG4 is to divide a base frequency into output frequencies which are typically integral factors of the base frequency. It is also capable of deriving frequency based on a crystal oscillator, although the ratio between the two frequencies is important for calibration of the basic frequency. The SN74ALS569ANG4 is clocked by a low-power LCD oscillator, which is connected to the CLOCK, UP and DOWN ports.

The SN74ALS569ANG4 includes two additional circuits, ON and OFF. These additional circuits support the chip\'s higher switching time, as well as providing better signal management. The ON/OFF circuit has a preset and a reset feature, so that it can be used to control the frequency of the output signal. When the signal is not needed, the OFF circuit can be set to operate at a lower frequency.

In summary, the SN74ALS569ANG4 is a versatile frequency divider and counter integrated circuit. It is useful in many applications such as LED dimming control, power measurement and timing of other analog or digital systems. It is relatively easy to configure with the STOP and PD bits, as well as the two additional ON and OFF circuits. The SN74ALS569ANG4 is clocked by a low-power LCD oscillator, and is capable of producing output frequencies from one base frequency.

The specific data is subject to PDF, and the above content is for reference