SN74ALVC244DWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74ALVC244DWG4 is a member of the Texas Instruments family of Low Voltage CMOS Logic devices. It is a octal bus transceiver with 3-state outputs. It is designed for memory and bidirectional bus-oriented applications. The 3-state outputs are controlled by two output-enables (Output Enable A and Output Enable B). The SN74ALVC244 DWG4 is a 4-bit transceiver consisting of eight non-inverting buffers with 3-state outputs. The 3-state outputs utilize active-low enable inputs (Output Enable A and Output Enable B). It is an advanced Si-gate CMOS technology that offers high-speed operation while consuming very low static and dynamic power.

The SN74ALVC244DWG4 is used in applications requiring low-voltage/low-power logic signals, including FPGAs and memory buses. It is designed to perform a wide range of logic operations, from shifting to data conversions. Its pins can be individually configured as input or output. The device has a fan-out of 4. Inputs and outputs are TTL and CMOS compatible. With two additional orders of on-board protection, the SN74ALVC244DWG4 offers the best protection for integrated circuits.

The SN74ALVC244DWG4 is a low-power device that provides reduced static and dynamic power consumption. It operates on a power supply voltage of 4.5V to 5.5V. Its operating temperature range is from –55°C to 125°C. Its propagation delay is significantly lower than other OCTAL transceivers.

The SN74ALVC244DWG4 is a low-power/low-voltage device and can be used in 3-state applications such as memory and bus-oriented data transfer. It performs different logic operations at a maximum speed of 36.9 MHz and is ideal for high-frequency applications. Its 3-state output buffers allow for multiple data paths and data conversions.

The SN74ALVC244DWG4’s pins can be individually configured as either an input or an output. The devices input and output ports can be controlled through the active-low enable inputs (Output Enable A and Output Enable B). When Output Enable A and B are at logical high, all outputs are in the high-impedance state.

The SN74ALVC244DWG4 has the ability to drive up to a 35mA output load and has a maximum low-power supply of 1.2V. Its static power consumption is less than 4mW. This device is available in a variety of packages, including SOIC-14 and SSOP-16.

The SN74ALVC244DWG4 is an ideal solution for multiple applications such as memory and bus-oriented data transfer. It provides very low power consumption and a high-speed operation with a maximum speed of 36.9 MHz. Its fan-out of 4 supports multiple data paths and data conversions. In addition, its 3-state output buffers are enabled by the active-low Output Enable A and B signals. The SN74ALVC244DWG4 can drive up to a 35mA output load and is available in SOIC-14 and SSOP-16 packages.

The specific data is subject to PDF, and the above content is for reference